ProForm 831.28645.0 user manual HOW to USE the High Performance Program

Page 19

HOW TO USE THE HIGH PERFORMANCE PROGRAM

Press the Resistance decrease button or begin pedaling to turn on the console.

A moment after you turn on the console, the dis- play will light.

Select the high performance program. Press the Programs button repeatedly until the words HIGH PERFORMANCE appear in the dis- play. The program time will appear in the display and a profile of the resistance settings for the pro- gram will scroll across the matrix in the display.

Begin pedaling to start the program.

The program is divided into 45 one-minute seg- ments. One resistance setting and one target rpm setting are programmed for each segment. Note: The same resistance setting and/or target rpm set- ting may be programmed for two or more consecu- tive segments. The displays for the high perfor- mance program work in the same way as the dis- plays for the cross training programs (see step 3 on page 16).

As you exercise, you will be prompted to keep your pedaling pace near the target rpm setting for the current segment. When the words PEDAL FASTER appear in the display, increase your pace. When the words PEDAL SLOWER appear in the display, decrease your pace. When the

words PEDALING IN RANGE appear, maintain your current pace.

Important: The target rpm settings are intend- ed only to provide motivation. Your actual pace may be slower than the target rpm set- tings. Make sure to exercise at a pace that is comfortable for you.

To stop the program at any time, stop pedaling. The time will begin to flash in the display. To restart the program, simply resume pedaling. When the last segment of the program ends, the words PROGRAM DONE will appear in the dis- play.

Follow your progress with the display. See step 4 on page 14.

Measure your heart rate if desired. See step 5 on page 15.

Change the display color if desired.

See step 6 on page 15.

Turn on the fan if desired.

See step 7 on page 15.

When you are finished exercising, the console will turn off automatically.

See step 8 on page 15.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Sears, Roebuck and Co., Hoffman Estates, IL Model No Serial NoTable of Contents Important Precautions Before YOU Begin Assembly Page Grease Page 9865 Grease Repeat this step for the Right Pedal Leg not shown Page HOW to Level the Elliptical Exerciser HOW to USE the Elliptical ExerciserHOW to Exercise on the Elliptical Exerciser Features of the Console Select the manual mode HOW to USE the Manual ModeFollow your progress with the display. The left side Your hands or gripping the contacts too tightly Select one of the five cross training programs HOW to USE a Cross Training Program Begin pedaling to start the program Continue the cross training program Perform the first strength exercise when promptedFollow your progress with the display HOW to USE a Calorie Goal Program HOW to USE the High Performance Program Hold the handgrip pulse sensor HOW to Adjust the Drive Belt Maintenance and TroubleshootingConsole Troubleshooting Handgrip Pulse Sensor TroubleshootingConditioning Guidelines Warning Strength Training Guidelines Key No. Qty Description Part LIST-Model NoQty Description ModelNo Exploded Drawing B-Model No Get it fixed, at your home or ours DAY Full Warranty
Top Page Image Contents