ProForm 831.28645.0 user manual HOW to USE the Manual Mode, Select the manual mode

Page 14

HOW TO USE THE MANUAL MODE

Press the Resistance decrease button or begin pedaling to turn on the console.

A moment after you turn on the console, the dis- play will light.

Select the manual mode.

Each time you turn on the console, the manual mode will be selected automatically. If you have selected a program, reselect the manual mode by pressing the Programs button repeatedly until the words MANUAL MODE appear in the top of the display.

Begin pedaling and change the resistance of the pedals as desired.

As you pedal, change the resistance of the ped- als by pressing the Resistance increase and decrease buttons repeatedly. There are ten resis- tance levels. Note: After you press the buttons, it will take a moment for the pedals to reach the selected resistance level.

Follow your progress with the display. The left side of the

display—The left side of the display will show the elapsed time. Note: When a program is selected,

the display will show the time remaining in the program instead of the elapsed time. An exception is the heart rate control program, which shows the elapsed time.

The left side of the display will also show your heart rate when you use the handgrip pulse sen- sor (see step 5 on page 15).

When a program is selected, the left side of the display will also show the approximate number of calories you have burned.

The center of the display—When you select the manual mode, the center of the display will show a track that represents

640 revolutions. As you exercise, indicators will appear in succession around the track until the entire track appears. The track will then disappear and the indicators will again begin to appear in succession.

The center of the dis- play will also show the resistance setting of the pedals for a few seconds each time the resistance setting changes.

The right side of the display—The right side of the display will show the distance (total revolutions) you have pedaled and

your pedaling pace, (revolutions per minute [rpm]). The top of the display—When you select the manual mode, the top of the display will show the approximate number of calories you have burned and the approximate number of grams of carbs you have burned.

14

Image 14
Contents Model No Serial No Sears, Roebuck and Co., Hoffman Estates, ILTable of Contents Important Precautions Before YOU Begin Assembly Page Grease Page 9865 Grease Repeat this step for the Right Pedal Leg not shown Page HOW to Exercise on the Elliptical Exerciser HOW to USE the Elliptical ExerciserHOW to Level the Elliptical Exerciser Features of the Console Follow your progress with the display. The left side HOW to USE the Manual ModeSelect the manual mode Your hands or gripping the contacts too tightly Begin pedaling to start the program HOW to USE a Cross Training ProgramSelect one of the five cross training programs Follow your progress with the display Perform the first strength exercise when promptedContinue the cross training program HOW to USE a Calorie Goal Program HOW to USE the High Performance Program Hold the handgrip pulse sensor Handgrip Pulse Sensor Troubleshooting Maintenance and TroubleshootingConsole Troubleshooting HOW to Adjust the Drive BeltConditioning Guidelines Warning Strength Training Guidelines Part LIST-Model No Key No. Qty DescriptionQty Description ModelNo Exploded Drawing B-Model No DAY Full Warranty Get it fixed, at your home or ours