ProForm 831.285371 user manual Assembly, Wrench A rubber mallet

ASSEMBLY

Assembly requires two persons.	Place all parts of the elliptical crosstrainer in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.		In	addition to the
included allen wrenches, assembly requires a phillips screwdriver		, an	adjustable
wrench	, and a rubber mallet	.
As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly.
The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on
page 14. The second number refers to the quantity used in assembly.		Note: Some small parts may have been

pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.

M8 Nylon	M10 Nylon	M10 Split	Handlebar	M10
Locknut (38)–4	Locknut (33)–6	Washer (45)–2	Washer (55)–2	Washer (29)–2
Console
Screw (59)–4	M8 x 19mm Button	M10 x 27mm	M10 x 27mm	Spring Bracket
	Screw (56)–2	Patch Screw (40)–2	Carriage Bolt (27)–2
				Washer (35)–2
M8 x 45mm Button Bolt (50)–4			M10 Bolt Set (25)–2
M10 x 74mm Bolt (7)–2			M10 x 75mm Carriage Bolt (34)–4

1.Identify the Front Stabilizer (10), which has round Endcaps (21) on it. While another person lifts the front of the Frame (1), attach the Front Stabilizer to the Frame with two M10 x 75mm Carriage Bolts (34) and two M10 Nylon Locknuts (33).

1
34
	1
34
10	33
21

5