ProForm 831.23744.0 user manual Tip Be careful not to pinch the wires during this step

Page 8

5.The Console (4) can be operated with four 1.5V “D” batteries (not included); alkaline batteries are recommended. IMPORTANT: If the elliptical exerciser has been exposed to cold tempera- tures, allow it to warm to room temperature before inserting batteries into the Console. If you do not do this, the console displays or other electronic components may become damaged. Remove the two screws from the back of the console, and remove the battery cover. Insert four batteries into the Console. Orient the batteries as shown by the markings inside the battery compartment. Then, reattach the battery cover.

The Console (4) can also be operated with a regulated 6-volt DC 2-amp power supply (not included). To purchase a power supply, call your local Sears store. To avoid damaging the console, use only a manufacturer-sup- plied power supply. Plug one end of the power supply into the jack on the Console; plug the other end into an outlet installed in accordance with all local codes and ordinances.

5

Cover

Batteries

4Batteries

Screws

6.Tip: Be careful not to pinch the wires during this step.

While a second person holds the Console (4) near the Upright (2), connect the console wire to the Wire Harness (100).

Attach the Console (4) with four M4 x 16mm Flat Head Screws (94).

6

 

 

4

Console Wire

 

100

Avoid pinching

2

the wires during

96

this step

 

94

 

94

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model No Serial No Sears, Roebuck and Co., Hoffman Estates, ILTable of Contents Important Precautions Before YOU Begin Assembly M10 x 35mm Shoulder M10 x 70mm Button ScrewAttach the other Wheel 50 in the same way Repeat this step for the Left Frame CoverAvoid pinching Wire Harness During this step Screws yetTip Be careful not to pinch the wires during this step Avoid pinching Wires during This stepPage Repeat this step for the other Pedal Arm Axle not shown 124 HOW to Exercise on the Elliptical Exerciser HOW to USE the Elliptical ExerciserHOW to Move the Elliptical Exerciser HOW to Adjust the Stride of the Elliptical Exerciser HOW to Change the Incline of the RampConsole Diagram Features of the ConsoleHOW to USE the Manual Mode Select the manual modeHOW to USE a Cross Training Workout Turn on the fan if desiredTurn on the console. See on Select a cross training workout Begin pedaling to start the workoutPerform the first strength exercise when prompted Continue the cross training workoutHOW to USE a Calorie Goal Workout Turn on the console. See on Select a calorie goal workoutHOW to USE a Target Toning Workout Turn on the console. See on Select a target toning workoutHOW to USE the High Performance Workout Maintenance and Troubleshooting Battery ReplacementHandgrip Pulse Sensor Troubleshooting HOW to Adjust the Reed SwitchExercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches R1107A Qty DescriptionQty Description Exploded Drawing A-Model No Drawing DAY Full Warranty Get it fixed, at your home or ours
Top Page Image Contents