9.Attach the Left Pedal (12) to the left Pedal Arm (14) with three M10 x 70mm Button Screws (75), three M10 Split Washers (78), and an M4 x 16mm Screw (84).
Repeat this step for the other side of the elliptical exerciser.
10.Apply a small amount of grease to two Wave Washers (88) and to the axles on a Pedal Arm Axle (21).
Identify an Upper Body Leg Spacer (113), which has a curved side. Slide a Wave Washer (88) and the Upper Body Leg Spacer onto the indi- cated axle of the Pedal Arm Axle (21); make sure that the curved side of the Upper Body Leg Spacer is facing away from the Pedal Arm Axle.
Identify a Pedal Leg Spacer (114), which has a flat side. Slide a Wave Washer (88) and the Pedal Leg Spacer onto the other axle of the Pedal Arm Axle (21); make sure that the flat side of the Pedal Leg Spacer is facing away from the Pedal Arm Axle.
Repeat this step for the other Pedal Arm Axle (not shown).
9
14 
78
12 
78
75
84
10
Curved Side | Grease |
|
113 88
Flat Side
88
21
114
Grease
10