Each HILL workout goes through four phases, each marked by different intensity levels. The WORKOUT PROFILE window displays the progress of these phases, as seen in the chart following these descriptions below. The heart rate should be measured at two stages in the workout to gauge its effectiveness. To do so, wear the chest strap. Note that the MESSAGE CENTER does not dis- play a request for a heart rate measurement during a HILL workout.
1
2Plateau increases the intensity slightly, and keeps it steady, to bring the heart rate to the low end of the target zone. Check the heart rate at the end of this phase.
3Interval Training is a series of increasingly steeper hills alternating with valleys, or stints of recovery. The heart rate should rise to the high end of the target zone. Check the heart rate at the end of this phase.
4
Each column, as seen in the WORKOUT PROFILE WINDOW and the chart above, represents one interval. The overall duration of the workout determines the length of each interval. Each workout is made up of 20 intervals, so the duration of each interval is equal to the duration of the entire workout divided by 20.
10 to 19 minutes: The interval durations initially are set at 30 seconds for a
20 to 99 minutes: All intervals last 60 seconds. If the user adds minutes to the
RANDOM
The RANDOM workout creates a terrain of hills and valleys that varies with each workout. More than one million different patterns are possible.
22