JVC TH-M45, TH-M55 manual Press and hold, Release, Clamp, · terminals

Getting started This page is for

%Connecting the satellite (front, center, surround) speakers (TH-M65)

Each speaker (SP-THM65F) can be used as a front or surround speaker.

CAUTION

•	When you connect (larger) speakers other than the		supplied ones, only use speakers with the same speaker impedance (SPEAKER IM	PEDANCE)
	as	indicated by the speaker terminals on the rear	of the powered subwoofer.
•	DO	NOT connect more than one speaker to one speaker terminal.

Before connecting the speaker cords;

Twist and pull the insulation coat off and remove.

Center speaker (SP-THM65C)

Front speakers (SP-THM65F)

Press and hold		Insert		the bare end of the		Release the
the clamp.		speaker		cord into the		clamp.
		terminal.
• Connect the white cords to the red (					ª) terminals and black
	cords to the black (		·) terminals.

White

Red

Black

Black

Surround speakers (SP-THM65F)

Powered subwoofer

Red

Black

White Black

Insert the speaker cords into the speaker terminals.

Route the speaker cord as shown at right.

•Be sure to remove all slack from the cord so that the speaker cord lies flat.

12