Playback
This section explains basic operations of DVD player.
For more details about DVD player operations, see pages 33 to 45.
•
shows the types of discs the operation is available for.
•Turn on your TV and select the correct input mode on the TV.
IMPORTANT
Before using the remote control for the following operation;
1 Set the remote control mode selector to
AUDIO .
2 Press DVD .
Remote control mode selector
(play button)
Basic playback
7To load a disc
Up to 5 discs can be loaded.
1Press 0 for a desired disc tray on the
center unit to open the disc tray.
The system turns on and the disc tray comes out.
2Place a disc on the disc tray.
With the label side up
When placing an 8 cm (3 inches) disc
7To start playback
3Press the selected DISC (1-5) button.
The system starts playback after closing the disc tray.
You can use the same buttons on the center unit for operations unless otherwise noted.
When loading an MP3 disc |
|
The MP3 control display ( | A pg. 36) appears on the TV screen and |
playback starts from the first track in the first group after pressing the DISC button in step 3. When all tracks in a group have been played, the system starts playback of tracks in the next group.
When loading a JPEG disc
The
after pressing the | DISC button in step 3. When stopping playback | |
of a JPEG disc, the JPEG control display ( | A pg. 37) appears on the | |
TV screen.
* Slide-show
Each file (still picture) is shown on the TV screen for about 3 seconds, then changed to the next file one after another automatically. When all files in a group have been played, the system starts playback of files in the next group.
7To pause playback
Press | 8. |
|
To return to normal playback, press | 3 (play button). | |
7 To stop playback |
| |
Press | 7. |
|
To change the playback disc while playing back the another disc
Press the desired | DISC |
•If no disc is set in the specified tray, the system starts playback of the disc in the next tray automatically.
To remove a disc
Press 0 for a desired disc tray on the center unit.
23