JVC manual TH-M55 TH-M45, TH-M45Be sure to identify each speaker, Powered subwoofer

Getting started This page is for

%Connecting the satellite (front, center, surround) speakers (TH-M55/TH-M45)

TH-M55: Each speaker (SP-THM55F) can be used as a front or surround speaker.
TH-M45:Be sure to identify each speaker		(SP-THM45C/SP-THM45F/SP-THM45S) and connect them to the corresponding terminals
	of the powered subwoofer.
CAUTION
•	When you connect (larger) speakers other than the supplied ones, only use speakers of the same speaker impedance (SPEAKER IMPE		DANCE) as
	indicated by the speaker terminals on the rear of the powered subwoofer.
•	DO NOT connect more than one speaker to one speaker terminal.

Front speakers (TH-M55: SP-THM55F, TH-M45: SP-THM45F)

Before connecting the speaker cords;

Twist and pull the insulation coat off and remove.

Center speaker (SP-THM55C)

	Press and hold		Insert the bare end of the		Release the
	the clamp.		speaker cord into the		clamp.
			terminal.
• Connect the white cords to the red (				ª) terminals and black cords
	to the black (	·) terminals.

TH-M55

TH-M45

Center speaker (SP-THM45C)

Surround speakers

(TH-M55: SP-THM55F, TH-M45: SP-THM45S)

CAUTION

When installing the satellite speakers of TH-M45 and the front/surround speakers of TH-M55 on the wall;

•Be sure to have them installed on the wall by a qualified personnel.

DO NOT install the satellite speakers on the wall by yourself to avoid unexpected damage from their falling off the wall due to or weakness in wall structure.

•Care must be taken in selecting a location for speaker installation on a wall. Injury to personnel or damage to equipment may installed interfere with daily activities.

Powered subwoofer

White

Black

Red

Black

incorrect installation

result if the speakers

13