AV COMPU LINK remote control system
The AV COMPU LINK remote control system allows you to operate
JVC TVs and VCRs through the center unit. This system is
equipped with the AV COMPU
terminals. To use this remote control system, you need to connect the video components you want to operate as follows.
•Refer also to the manuals supplied with your TV and video components.
Connecting a TV and VCR
CAUTION
Before connecting;
•If you have already plugged your VCR, TV and the center unit into the AC outlets, unplug their AC power cords first.
1Connect the center unit to a TV and VCR.
• For details, see page 8 and 14.
2Connect the center unit to a TV and VCR using the optional AV COMPU LINK cords.
AV COMPU LINK cord (not supplied)
TV
VCR
3Plug the AC power cords of the VCR, TV and the center unit into the AC outlets.
4Turn on the connected components first, then turn on the center unit.
•When turning on the TV for the first time after the AV COMPU LINK connection, turn the TV volume to minimum using the TV volume control on the TV.
•When turning on the VCR, use the remote control supplied
with this system. (Press | FVCR/DBS | .) |
NOTE
• To correctly use the automatic selection of TV input mode, select the
correct “M. OUT” setting. ( | A pg. 54) |
Available functions
The AV COMPU LINK remote control system allows you to use the functions listed following.
One-touch video play
Simply by inserting a video cassette without its safety tab into the VCR, you can enjoy video playback without manually setting other switches. This system automatically turns on and changes the source to VCR.
The TV automatically turns on and changes the input mode to the appropriate position so that you can view the playback picture.
When you insert a video cassette with its safety tab in place, press
the play ( 3) button on the VCR or on the remote control to get the same result.
One-touch DVD play
Simply by starting playback on the
Automatic selection of TV input mode
When you select DVD or VCR as the source to play on the system, the TV automatically changes the input mode to the appropriate position so that you can view the playback picture.
Automatic Power On/Off
The TV and VCR turn on and off along with the system.
When you turn on the system;
•If the previously selected source is “DVD”, only the TV will turn on automatically.
•If the previously selected source is “VCR”, the TV and VCR will turn on automatically.
When you turn off the system, the TV and VCR will turn off.
NOTE
•If you turn off the system while recording on the VCR, the VCR will not turn off and will continue recording.
55