JVC TH-M45, TH-M55 manual For VCR operations, Release VCR Try operating your VCR by pressing

Getting started

4 Press number buttons (1-9, 0) to enter				4 Press number buttons (1-9, 0) to enter
the manufacturer’s code (2 digits).				the manufacturer’s code (2 digits).
Examples:		0 , then	1 .	Examples:	0 , then	9.
For a GI Jerrold product: Press				For a Philips VCR: Press
For a Sony product:	Press	2 , then	0 .	For an NEC VCR: Press	2 , then	5 .

Manufacturer	Code
Echostar	21
GI Jerrold	01, 02, 03, 04, 05, 06, 07, 08
Hamin/Regal	15, 16, 17, 18
Pioneer	13, 14
RCA	19
Scientific Atlanta	09, 10
Sony	20
Zenith	11, 12

5Release DBS.

6Try operating your DBS tuner or CATV

converter by pressing . VCR/DBS.

When your DBS tuner or CATV converter turns on or off, you have entered the correct code.

If there is more than one code listed for your brand, try each one until you enter the correct one.

NOTE

•Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

•Set the codes again after replacing the batteries of the remote control.

%Operation

IMPORTANT

Before using the remote control to operate a DBS tuner or CATV converter;

1 Set the remote control mode selector to

	VCR/DBS	.
2	Press DBS .
The following buttons are available:
F VCR/DBS		:	Turns DBS tuner or CATV converter on and
			off.
CHANNEL +/–		:	Changes the channels.
1-10	, 0 , +10 (100+): Selects the channel.

For VCR operations

You can operate your VCR using the remote control supplied with this system.

• Refer also to the instruction manuals supplied with your VCR.

Manufacturer	Code	Manufacturer		Code
JVC	01, 02, 03		Philips		09
Emerson	11, 26	RCA		05,	06
Fisher	29		Samsung	24
Funai	10, 14, 15, 16		Sanyo	21, 22, 23
Gold Star	12	Sharp		27, 28
Hitachi	04		Shintom	30
Mitsubishi	13	Sony		18, 19, 20
NEC	25		Zenith	08
Panasonic	07, 17

5Release VCR.

6Try operating your VCR by pressing

.VCR/DBS.

When your VCR turns on or off, you have entered the correct code.

If there is more than one cord listed for your brand, try each one until you enter the correct one.

NOTE

•Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

•Set the codes again after replacing the batteries of the remote control.

%Operation

IMPORTANT

Before using the remote control to operate a VCR;

1 Set the remote control mode selector to

VCR/DBS .

2 Press VCR .

The following buttons are available:

FVCR/DBS : Turns VCR on and off. 3(play button): Starts playback.

7 :	Stops operation.
8 :	Pauses playback.
¢:	Fast forwards video tape.
4:	Rewinds video tape.
REC :	Press this button together with	3(play button) to
	start recording or together with	8to pause
	recording.
CHANNEL +/–	: Changes the TV channels on the VCR.

%To set the manufacturer’s code

1Slide the remote control mode selector to VCR/DBS.

2Press and hold VCR.

Keep the button pressed until step 4 is finished.

3Press ENTER.

NOTE

When operating a VCR or DBS tuner/CATV converter;

• The source setting of VCR or DBS remains after you have changed

the remote control mode selector to			AUDIO or TV . When operating
VCR or DBS tuner/CATV converter again, it is not necessary to press
VCR	or DBS	after setting the remote control mode selector.

18