Suunto M9_en.p65 manual

Page 73

Bearing (bea)

adestination.

Course

Course Made Good (cmg)

Cross Track Error (xte)

Distance from start (dfs)

Distance Made Good (dmg)

Distance Made on Course (dmc)

Distance to lay line (dll)

Distance to finish (dtf)

Distance to start line (dsl)

Estimated Time of Arrival (eta)

Estimated Time Enroute (ete)

The compass direction from your current location to

A selected route between two locations, not necessarily a straight line.

Heading from the starting point to the current location.

Aberration from the selected course towards the destination in degrees.

Distance from the start point.

The distance traveled on a straight line from the starting point towards the destination.

The distance traveled on the chosen course towards the destination.

Distance to the optimal line towards a waypoint.

Distance to the finish line.

Distance to start line.

The estimated time of day when you will reach your destination based on the current velocity.

The estimated travel time to your current destination based on the current velocity and heading.

73

Image 73
Contents Page Customer Service Contacts Table of Contents Stopwatch Function Menu Alarm Time/Date General Units Position Care and Maintenance ChecklistIntroduction Water ResistanceCharging the Battery Display HOW to USE Your Suunto M9Buttons Stop/Cancel Button Short PressShort and Long Press Start/Data Button Short PressArrow Buttons Short Press Enter Button Short PressMove between the main modes Activating the key lock Key LockDeactivating the key lock Menus Alarm TIME/DATEGeneral Temp CUnderstanding GPS Navigating in MenusOverview Accuracy Line-of-sight NeededGPS Usage Versatility Modes Time ModeGeneral Information Activating alarms AlarmStopwatch Function MenuAcknowledging alarms Deactivating alarmsTime/Date Sync Setting the time and the dual timeGeneral Setting the lightSetting the contrast Setting the brightnessSetting the tones Setting the time format Setting the display informationUnits Setting the temperature unit Setting the date formatSetting the air pressure unit Setting the distance unit Setting the elevation unitSetting the speed unit Setting the datum Setting the position formatSetting the wind unit Absolute air pressure Weather ModeAir pressure graph Barometric MemoryWeather Alarm Compass Mode Calibrating the Compass Page Setting the compass declination with the GPS Setting the compass declination manuallyDeclination Off AutoSailing Mode Sailing Data display Tracking Viewing the recorded tracks TracksRace Navigation ModeNavigation Data display Navigate Creating a new route RoutesCreating a new waypoint Activating a routeErasing a route Editing a route waypoint Viewing and erasing route waypointsMy Points Racing Mode Racing data display Main Display During the RaceMain Display After the Race Race summary GPS Function Menu Function menu before the raceCourse Start line Synchronizing the timerWINDdir Wind Data Function menu during the raceTurn Buoy Starboard/Port TackRestart MOBFinish line 1 GPS Function MenuActivating the MOB function 2 MOBMemory Point MOB Data displayCoordinates of the position fix Current altitude PositionWind force PC Interface Additional FeaturesTransferring Data To transfer data Suunto Sail Manager Suunto Sail Manager FeatureChanging the Suunto M9 Settings System Requirements SUUNTOSPORTS.COMCommunities My SuuntoGetting Started Sport ForumsTechnical Specifications Number Name Description GPS Datum ListingDAL KAN HJO NAS-I SAN-A SAP OHA-D Glossary Page Page Copyright and Trademark Notice Limits of Liability and ISO 9001 Compliance Disclaimer