STEP 3 (See Diagram 3)
A.) Attach the Rear Stabilizer (#21) and the Chromed Foot Support (#25) to the Cross Brace (#3). Secure them with two M10 x 3 ½” Carriage Bolts (#54), Ø ¾” Washers (#67) and M10 Aircraft Nuts (#69).
B.) Attach the Support Bracket (#14) to the Rear Stabilizer. Secure it with two M10 x 2 ¾” Carriage Bolts (#55), Ø ¾” Washers (#67) and M10 Aircraft Nuts (#69).
C.) Slide the Sliding Weight Post (#13) onto the Rear Vertical Frame (#7). Attach the Vertical Frame to the Support Bracket (#14). Secure it with two M10 x 5/8” Allen Bolts (#64) and Ø ¾” Washers (#67). Attach two Spring Clips (#31) to the posts.
D.) Attach four Olympic Weight Posts (#15) to the Right & Left Supports (#5 & 6). Secure each Post with two M10 x 2 3/8” Carriage Bolts (#56), one 4 ¾” x 2 3/8” Bracket (#27), two Ø ¾” Washers (#67), and two M10 Aircraft Nuts (#69). Attach a Spring Clip to each Post.
DIAGRAM 3
7