STEP 2 (See Diagram 2)
A.) Insert the Axle (# 4) into the Pivot on the Main Frame (#1). Attach the Left and Right Handlebars (#2) & (#31) onto the Axle from both sides. Secure the Axle with two ∅ 7/8” Washers (#7) and M8 Nylon Nuts (#8). Close both ends with two plastic Axle End Caps (#9).
B.) Insert the Lower Handlebar (#3) into the Left Handlebar (#2). Secure it with two M6 x
5/8” Allen Bolts (#6) and ∅ ½” Washers (#5). Repeat same procedure to install the other side.
DIAGRAM 2
5