Return to Table of Contents
11. USING THE ALARM MODE
The alarm setting procedure and other procedures for alarm use are the same for Alarm 1, 2 and 3. Only the tone that sounds is different.
The alarm sounds for 15 seconds when the set time is reached once a day. When the alarm is sounding, it can be turned off by pressing button (A) or (B).
<Setting the Alarm Time>
1.Turn the crown and set the mode hand to either the Alarm 1, 2 or 3
2.Press either button (A) or button (B) to access the city to be corrected.
3.When the crown is pulled out to the second click (alarm time setting position), the watch enters the alarm correction state.
4.When button (A) is pressed, the location to be corrected changes each time it is pressed. Select the location to be corrected so that it flashes.
x The alarm can be set (ON) or canceled (OF) by pressing button (B) when the watch is in the alarm ON/OF correction state.
x When the crown is turned forward (clockwise) in the "hours" or "minutes" correction state, correction is made in the positive direction. When the crown is turned backward
x Turning the crown continuously allows corrections to be made rapidly.
5.After corrections have been completed, return the crown to the normal position.
Note:
1.When the time mode is set to the
Return to Table of Contents