Return to Table of Contents
<Switching Alarm ON and OFF>
The alarm can be switched ON and OF by pulling out the crown to the first click even when not in the alarm correction state.
1.Pull out the crown to the first click in the alarm mode to allow the alarm to be switched ON and OF.
2.Pressing button (B) switches the alarm ON and OF each time it is pressed.
3.Return the crown to the normal position after the alarm has been set to ON or OF.
<Alarm Monitor>
1.Pressing button A and B simultaneously during the normal alarm display causes the alarm to sound for as long as they are pressed.
12.USING THE CHRONOGRAPH
The chronograph is able to measure and display time up to a maximum of 23 hours, 59 minutes, 59.99 seconds in 1/100th second units. After 24 hours have elapsed, the chronograph automatically returns to the chronograph reset display (00'00"00) and stops.
Normal Chronograph Display | <Chronograph Measurement> | |
| 1. | Turn the crown to set the mode hand to the |
| chronograph [CHR] mode. | |
| 2. | Pressing button A repeatedly starts and stops |
| the chronograph each time it is pressed. | |
| 3. | Split time is displayed for 10 seconds when |
| button (B) is pressed during chronograph | |
| measurement. | |
| 4. | Pressing button (B) while the chronograph is |
| stopped returns the chronograph to the | |
| ||
The "SPL" mark flashes during split time display.
Return to Table of Contents