Sharp PGB10S Auto Sync Auto Sync Adjust- ment, Signal Info Checking the Input Signal

Computer Image Adjustment

Auto Sync (Auto Sync Adjust- ment)

Used to automatically adjust a computer image.

Select “Auto Sync” on the “Fine Sync” menu and set it to “”(ON) or “”(OFF).

Setting the menu screen Page 34

Example: “Fine Sync” menu screen for INPUT 1 mode

Description of Auto Sync Adjustment

Selectable Settings	Description
	Auto Sync adjustment will occur when
ON	the projector is turned on or when the
	input signals are switched, when
	connected to a computer.
OFF	Auto Sync adjustment is not automati-
	cally performed.

Note

•Auto Sync adjustment is also performed by

pressing on the projector or on the remote control.

•The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector.

•When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjust- ments. (See page 39.)

Signal Info (Checking the Input Signal)

Select “Signal Info” on the “Fine Sync” menu to check the current input signal informa- tion.

Checking the menu screen Page 34

Example: “Fine Sync” menu screen for INPUT 1 mode

Note

•The projector will display the number of scanned lines available from audio-visual equipment such as a DVD player or Digital Video.

-40