Picture Adjustment
You can adjust the projector’s picture to your preferences using the “Picture” menu.
Adjusting the Image
Select the item on the “Picture” menu and adjust the image.
Adjusting the menu screen 
Page 32
Example: “Picture” screen menu for INPUT 1 (RGB) mode
Description of Adjustment Items
Selectable items | Press \ | Press |
Contrast | for less contrast. | for more contrast. |
Bright | for less brightness. | for more brightness. |
Color | for less color intensity. | for more color intensity. |
Tint | for making skin tones purplish. | for making skin tones greenish. |
Sharp | for less sharpness. | for more sharpness. |
Red | for weaker red. | for stronger red. |
Blue | for weaker blue. | for stronger blue. |
CLR Temp (Adjusting the
Color Temperature)
Select “CLR Temp” on the “Picture” menu and the desired color temperature setting.
Setting the menu screen 
Page 34
Example: “Picture” screen menu for INPUT 1 (RGB) mode
Description of Color Temperature Settings
Selectable settings | Description | |
5500K | For lower color temperature for warmer, | |
6500K | reddish | |
7500K |
|
|
|
| |
8500K |
|
|
|
| |
9300K | For higher color temperature for cooler, blu- | |
10500K | ish, | |
Note
•“Color”, “Tint” and “Sharp” are not displayed when selecting INPUT 1 and setting the “Sig- nal Type” to “RGB” or setting the “Signal Type” to “Auto” and the input signal is recognized as an RGB signal.
•“Red” and “Blue” cannot be adjusted when “sRGB” is set to “ON”.
•“Sharp” can be adjusted when 480I, 480P, 540P, 580I, 580P, 720P, 1035I or 1080I signals are detected while “Signal Type” for INPUT 1 is set to “Component” or set to “Auto” and the input signal is recognized as a component signal.
•To reset all adjustment items, select “Reset” and
press 
.
Note
•Values for “CLR Temp” are only approximations.
•“CLR Temp” cannot be set when “sRGB” is set to “ON”.
-36
