Sharp PGB10S Video System Setting, Background Selecting a Startup and Background Image

Using the “Options” Menu

Video System (Setting the

Video System)

The video input system mode is preset to “Auto”; however, a clear picture from the connected au- dio-visual equipment may not be received, de- pending on the video signal difference. In that case, switch the video signal.

Select “Video System” on the “Options” menu and the appropriate video system.

Setting the menu screen Page 34

Example: “Options” menu screen for INPUT 2 (S-Video) mode

Description of Video Systems

Selectable settings	Description
PAL	When connected to PAL video
	equipment.
SECAM	When connected to SECAM video
	equipment.
NTSC4.43	When reproducing NTSC signals in
	PAL video equipment.
NTSC3.58	When connected to NTSC video
	equipment.

Note

•The video signal can only be set in INPUT 2 or INPUT 3 mode.

•When the system mode is set to “Auto”, you may not receive a clear picture due to signal differences. Should this occur, switch to the video system of the source signal.

Background (Selecting a Startup and Background Image)

Select “Background” on the “Options” menu and the image displayed upon the projector’s startup and when no signal is being sent to the projec- tor.

Setting the menu screen Page 34

Example: “Options” menu screen for INPUT 2 (S-Video) mode

Sharp

Blue

None

Description of Background Images

Selectable settings	Description
Sharp	SHARP default image
Blue	Blue screen
None	Black screen

Note

•If the input signal has interference, the screen will be displayed during interference.

-42