Sharp PGB10S Auto Power Off Auto, Eco Mode Setting the Eco Mode, Power Off Function

Eco Mode (Setting the Eco Mode)

Select “” (Eco Mode) or “” (Standard Mode) in “Eco Mode” on the “Options” menu.

Setting the menu screen Page 34

Example: “Options” menu screen for INPUT 2 (S-Video) mode

Description of Eco Mode

Selectable settings	Brightness	Power consumption	Lamp life
		(When using AC 100V)
	90%	170 W	Approx.
(Eco mode)			4,000 hours
	100%	185 W	Approx.
(Standard mode)			2,000 hours

Note

•Although lamp life and noise are improved when

“Eco Mode” is set to “” (Eco mode), bright- ness decreases by 10%.

•“Eco Mode” is factory preset to “” (Standard mode).

Auto Power Off (Auto

Power Off Function)

When no input signal is detected for more than 15 minutes, the projector will automatically en- ter the standby mode if set to “” (ON).

The Auto Power Off function will be disabled if it has been set to “” (OFF).

Select “” (ON) or “” (OFF) in “Auto Power Off” on the “Options” menu.

Setting the menu screen Page 34

Example: “Options” menu screen for

INPUT 2 (S-Video) mode

MenuUsing the

Note

•When the Auto Power Off function is set to “ON”, 5 minutes before the projector enters the standby mode, the message “Enter STANDBY mode in X min.” will appear on the screen to indicate the remaining minutes.

-43