Citizen C650 manual Using the Timer, Timer Initial Setting Display Setting the Timer

Return to Table of Contents

13. USING THE TIMER

The timer can be set to a maximum of 99 minutes in 1-minute units. When the set time has elapsed, a tone indicating that the set time is up sounds for about 5 seconds, after which the timer returns to the timer initial setting display.

<Timer Initial Setting Display>	<Setting the Timer>
	1.	Turn the crown to set the mode hand to the timer
	[TMR] mode.
	2.	Pull out the crown to the second click (timer
	setting position) to enter the "minutes" correction
	state.
	3.	When the crown is turned forward (clock- wise) in
	the "hours" or "minutes" correction state, correction
	can be made in the positive direction. When the
	crown is turned backward (counter-clockwise),
	correction can be made in the negative direction.
	4.	After setting, return the crown to the normal
	position.

<Using the Timer>

1.Press button (A) to start the timer.

2.Pressing button (A) again during measurement stops the timer.

3.Pressing button (B) during measurement returns the watch to be timer initial setting display and resumes measurement.

4.Pressing button (B) when the timer is stopped returns the watch to the timer initial setting display.

Return to Table of Contents