Citizen C650 manual Position Correction Setting to the Watch Base Position

Page 6

Return to Table of Contents

O-Position Correction (Setting to the Watch Base Position)

When setting the 0-position of each hand, always make sure to turn the crown forward (clock- wise) to set each hand to its 0-position in the clockwise direction.

1.Turn the crown while in the normal position to set the mode hand to the chronograph [CHR] mode.

2.Pull the crown out to the second click (0-position correction position).

x The second hand, minute hand, hour hand, 24-hour hand, UTC hour hand and UTC minute hand rapidly advance to the position stored in memory.

x "HR" lights during digital display 2 indicating that the watch is in the correction state.

3.Turning the crown forward (clockwise) allows correction to be made in the positive direction. Turning the crown continuously allows the 0-position to be corrected continuously.

4.Pressing button (A) switches the correction location between "MIN" (minute hand) and "SEC" (second hand) each time it is pressed.

5.Turn the crown forward (clockwise) to align each hand at the 0-position at each correction location. Although correction can be made in the negative direction by turning the crown backward (counter-clockwise), always make sure to set the 0-position by turning the crown for- ward to ensure that the 0-position is set correctly.

x The 24-hour hand is corrected in conjunction with the hour hand.

x The UTC hour and minute hands are corrected in conjunction with the minute hand. • The second hand can only be corrected in the forward (clockwise) direction only. 6. After correcting, return the crown to the normal position.

After correcting the 0-position of each hand, reset the time, calendar and other modes before using the watch.

Note:

None of the buttons on the watch operate during movement of each hand. Operate the buttons only after the hands have stopped moving.

Return to Table of Contents

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Setting Instructions for Movement Caliber C650 Features Before UsingProper Use of this Watch Specifications Names of Components and Major Functions Checking O-POSITION of Each Hand Switching the Mode Display FunctionsSwitching the Mode Position CheckPosition Correction Setting to the Watch Base Position Access Procedure Cities and UTC Time Difference Pre-registered in this WatchSwitching Analog Time and Digital Time Setting the Time Time is Corrected by Digital DisplaySetting the Date Date is Corrected by Digital Display Using the Alarm Mode Setting the Alarm TimeAlarm Monitor Using the ChronographSwitching Alarm on and OFF Normal Chronograph Display Chronograph MeasurementUsing the Timer Using the TimerTimer Initial Setting Display Setting the Timer Confirming Set Cities Using Zone SettingUsing Zone Setting Registration of Arbitrary City and Time DifferenceAll-Reset Procedure ALL-RESETCanceling Registered Cities Order in which Registered Cities and DisplayedFunctions Unique to SOLAR-POWERED Watches Insufficient Charging Warning Function Digital Display in Each ModeWhen the Insufficient Charging Warning Function is Canceled Digital DisplayTime Setting Warning Function Canceling the Time Setting Warning FunctionOvercharging Prevention Function Power Save Canceling Power SaveAnalog Display Canceling Manual Power Save Manual Power SaveSetting Manual Power Save Charge IndicatorGeneral Reference for Charging Times Be sure to keep the watch charged at all timesUsing the Register Ring General Calculation Functions Proportion Precautions about Care and Handling of Watches Water Resistance
Top Page Image Contents