Return to Table of Contents
[Manual Power Save]
When not using the watch for an extended period of time, activating the manual power save function after first charging the watch until all three bars of the graphic display of the secondary battery charge indicator are lit enables the watch to be stored for a longer period of time. Furthermore, do not charge the watch while the manual power save function is activated. First cancel the manual power save function before charging.
<Setting Manual Power Save>
The manual power save function is activated by setting the city name to "C65" and the time difference to "O" while following the procedure described in “<Registration of Arbitrary City and Time Difference>” in section 14 on Using Zone Setting, and then returning the crown to the normal position.
(Analog Display)
• Each hand stops moving at its current location.
(Digital Display)
• The entire digital display is not lit.
Notes:
•None of the button operations function in any mode.
•The mode does not change even when the mode hand is attempted to be moved by turning the crown.
<Canceling Manual Power Save>
Each hand rapidly advances to the current time and Manual Power Save is canceled when the crown is pulled out to the second click.
Return the crown to the normal position after canceling the manual power save function.
The digital display reappears simultaneous to resumption of power generation, and the alarm sounds for the set duration. However, the chronograph returns to the reset state and the timer switches to the initial setting display.
[Charge Indicator]
The charge indicator provides a simple graphic indication in digital display area 2 of the amount of charge remaining in the secondary battery.
<Interpretation of Secondary Battery Charge Levels>
Fully charged | Sufficiently charged | Low charge | Hardly any charge |
When none of the bars of the graphic display are lit, the secondary battery has essentially become completely discharged and the second hand begins
Return to Table of Contents