JVC CA-D702T, GVT0004-003A manual Regular Play, Music Scan, Fast Left and Fast Right

Page 31

Regular Play

When the power is already on, you can use this basic procedure:

1.Press down 0 for the deck you want to use.

2.When the cassette holder opens, put a cassette in, with the exposed part of the tape down, toward the base of the Unit.

• If the cassette holder does not open, turn the power off, then back on and press down 0 again.

3.Close the holder gently.

When both Deck A and Deck B contain a tape, the last deck to have a tape inserted is selected. To change the selected deck, press DECK A/B. When using the Remote Control, press TAPE A or

TAPE B.

4. Press TAPE ª £ on the Unit.

COMPU PLAY

When the TAPE ª £ is pressed while the power is on standby, the power is automatically turned on.

When using the Remote Control, first press TAPE CONTROL followed by 3.

If the power is on standby, the power will automatically be turned on.

When “TAPE” appears on the display, the tape play starts toward the direction currently selected.

To stop playing, press 7STOP on the Unit (or 7on the Remote Control). To remove the tape, stop the tape, and press down 0.

To change deck while playing a tape, press TAPE ª £ after pressing DECK A/B on the Unit or press 3after pressing TAPE A or TAPE B on the Remote Control.

To change the direction of a tape while it is playing, press TAPE ª £ on the unit or

DIRECTION on the Remote Control.

Fast Left and Fast Right ——————————————————

While the tape is stopped, press TUNING DOWN 1on the MULTI CONTROL (or 1on the Remote Control) and the tape will wind rapidly to the left side of the cassette without playing.

While the tape is stopped, press Á TUNING UP on the MULTI CONTROL (or Á on the Remote Control) and the tape will wind rapidly to the right side of the cassette without playing.

Note: Deck A and Deck B cannot be used for playback at the same time.

Music Scan

To find the beginning of a music track during play, use the Music Scan function. Music Scan searches for blank portions that usually separate selections, then plays the next selection.

Finding the Beginning of the Current Selection —————

Press TUNING DOWN 1 or Á TUNING UP on the MULTI CONTROL (or 1 or Á on the Remote Control) during play.

Make sure that you press TUNING DOWN 1or ÁTUNING UP on the MULTI CONTROL (or 1or Áon the Remote Control) in the opposite direction to that in which the tape is playing. Searching stops at the beginning of the current selection, and the current selection starts automatically.

or

Finding the Beginning of the Next Selection ———————

Press TUNING DOWN 1 or Á TUNING UP on the MULTI CONTROL (or 1 or Á on the Remote Control) during play.

Make sure that you press TUNING DOWN 1or ÁTUNING UP on the MULTI CONTROL (or

1or Áon the Remote Control) in the same direction as that in which the tape is playing. Searching stops at the beginning of the next selection, and the next selection starts automatically.

English

27

Page 30 Page 32
Image 31
Page 30 Page 32
Contents CA-D702T If in Doubt Consult a Competent Electrician Class Laser Product Precaução Ventilação adequada Precaución el aparato debe estar bien ventiladoHow This Manual Is Organized FeaturesInstallation of the Unit Power cordTable of Contents Using the Remote Control AccessoriesSetting the Voltage Selector Switch How to Put Batteries in the Remote ControlUsing an FM 75-Ohm Antenna Cable not supplied Connecting the FM AntennaConnecting the AM Antenna Using the Supplied Wire AntennaConnecting the Optional Speakers Connecting the SpeakersRight Speaker On the Unit Connecting Auxiliary EquipmentOn the Remote Control VCR or other equipmentCommon Operations Demo ModeDisplay Turning the System On Setting the ClockTurning the Power On and Off Adjusting the VolumePress Shift Press Balance L 10 or R +10 Balance AdjustmentReinforcing the Bass Sound For private listeningSound Modes Customizing a Sound ModeFront When a Rear Speaker is ConnectedAdjusting the Rear Speaker Level Use Multi Control to adjust to any Sound Mode desiredListening to Auxiliary Equipment Turn down the volume level to Press AUXDolby Surround Accessing the Dolby Surround Functions3CH Logic Adjusting the level of the Rear Speakers for PRO Logic only Center Speaker ModeDelay Time Mode Adjusting the level of the Center SpeakerGetting Ready to Use Dolby Pro Logic Setting-up Dolby Pro LogicSpeaker Arrangements for Dolby Pro Logic Speaker Arrangements for Dolby 3 Channel Logic Using Dolby SurroundSetting-up Dolby 3ch Logic Getting Ready to Use Dolby 3 Channel LogicTuning in a Station Using the TunerSetting the AM Tuner Interval Spacing Switching between Frequency Bands Presetting StationsThree Ways to Select a Station Changing the FM Reception Mode CD indicator Using the CD PlayerEntering CD Operation Mode with the Remote Control Disc indicatorLoading CDs Basics of Using the CD Player Continuous PlayPlaying a CD Changing Discs While Playing Locating a Track with the Remote Control DirectlySelecting a Track Fast Forward / ReverseOn the Unit Press PROGRAM/RANDOM On the Remote Control Press PROGRAM/RANDOM on the UnitPrograming the Playing Order TracksPress the number keys 1 to 10 and +10 to select the tracks Random PlayChecking the Program Changing the ProgramUnlocking the Trays Repeating a Track or the DiscsTray Lock Function Locking the TraysEntering the Tape Operation Mode with the Remote Control Using the Cassette DeckTape ª £ Finding the Beginning of the Current Selection Regular PlayMusic Scan Fast Left and Fast RightReverse Mode on Reverse Mode OFF Reverse ModeThings to Know before You Start Recording RecordingTo pause at any time during the recording process Standard RecordingCheck the recording direction for the tape Press Tape Control then pressAuto Edit Recording CD Direct RecordingRecording AM Station to Tape To stop dubbing, press 7STOP How to Use DubbingTape to Tape Recording Dubbing Press DubbingUsing the Timer Set the time you want the Unit to turn off Setting the Daily TimerPress TIMER/CLOCK again Set the time you want the Unit to turn onTo use a Cassette Deck as the source Turning the Daily Timer On and OffSetting the Volume Level To change the Daily Timer settingSetting the Recording Timer To cancel the Sleep Timer setting Setting the Sleep TimerTurning the Recording Timer On and Off To change the Sleep Timer settingSleep Timer Timer PriorityExample Setting Operation Recording TimerSinging Along with Karaoke Using the MicrophoneKaraoke Sing Along Sound DisplayDigital Echo Press FM MODE/ECHO on the Remote ControlRecording Your Singing Recording from the Microphone Microphone MixingPlaying the Microphone Sound through the Speakers Recording Microphone MixingGeneral Notes Care and MaintenanceCompact Discs Cassette Tapes Moisture CondensationAction TroubleshootingSymptom Possible CauseSpecifications Important for mains AC line
Top Page Image Contents