JVC GVT0004-003A, CA-D702T manual Specifications

Page 48

English

Specifications

Amplifier Section

Output Power (IEC 268-3/DIN)

 

Front

45 watts per channel, min. RMS, both channels driven, into 6 ohms at 1 kHz,

 

with no more than 0.9% total harmonic distortion.

Center

25 watts min. RMS, both channels driven, into 8 ohms at 1 kHz, with no

 

more than 0.9% total harmonic distortion.

Rear

12.5 watts per channel, min. RMS, both channels driven, into 16 ohms at

 

1 kHz, with no more than 0.9% total harmonic distortion.

Input Sensitivity/Impedance (1 kHz)

 

AUX

300 mV/50 kohms

MIC 1

1.5 mV/4.7 kohms

MIC 2

1.5 mV/4.7 kohms

Speaker terminals

6 - 16 ohms

Cassette Deck Section

Frequency Response

Type II (CrO2) :

50 - 14,000 Hz

Type I (NORMAL) :

50 - 14,000 Hz

Wow And Flutter

0.15% (WRMS)

CD Automatic Changer Section

CD Capacity

3 discs

Dynamic Range

85 dB

Signal-To-Noise Ratio

90 dB

Wow And Flutter

Unmeasurable

Tuner Section

FM Tuner

 

 

Tuning Range

87.5 - 108.0 MHz

AM Tuner

 

 

Tuning Range

531

- 1,602 kHz (at 9 kHz channel space)

 

530

- 1,710 kHz (at 10 kHz channel space)

Dimensions

265

× 315 × 340 mm (W/H/D)

 

(10-7/16 × 12-7/16 × 13-7/16 inches)

Mass

9.0 kg (19.8 lbs)

Accessories

 

AM Loop Antenna (1)

 

Remote Control (1)

 

Batteries R6P (SUM-3)/AA (15F) (2)

 

FM Wire Antenna (1)

 

AC Plug Adaptor (except for Argentina) (1)

Power Specifications

 

Power Requirements

AC 110/127/220/230-240 V , 50/60 Hz adjustable

 

with the voltage selector

Power Consumption

160 watts

 

12 watts (in standby mode)

Max. Power Comsumption

340 watts (Taiwan only)

Design and specifications are subject to change without notice.

44

Image 48
Contents CA-D702T If in Doubt Consult a Competent Electrician Class Laser Product Precaución el aparato debe estar bien ventilado Precaução Ventilação adequadaFeatures Installation of the UnitPower cord How This Manual Is OrganizedTable of Contents Accessories Setting the Voltage Selector SwitchHow to Put Batteries in the Remote Control Using the Remote ControlConnecting the FM Antenna Connecting the AM AntennaUsing the Supplied Wire Antenna Using an FM 75-Ohm Antenna Cable not suppliedConnecting the Speakers Connecting the Optional SpeakersRight Speaker Connecting Auxiliary Equipment On the Remote ControlVCR or other equipment On the UnitDemo Mode Common OperationsDisplay Setting the Clock Turning the Power On and OffAdjusting the Volume Turning the System OnBalance Adjustment Reinforcing the Bass SoundFor private listening Press Shift Press Balance L 10 or R +10Customizing a Sound Mode Sound ModesWhen a Rear Speaker is Connected Adjusting the Rear Speaker LevelUse Multi Control to adjust to any Sound Mode desired FrontTurn down the volume level to Press AUX Listening to Auxiliary EquipmentAccessing the Dolby Surround Functions Dolby Surround3CH Logic Center Speaker Mode Delay Time ModeAdjusting the level of the Center Speaker Adjusting the level of the Rear Speakers for PRO Logic onlySetting-up Dolby Pro Logic Getting Ready to Use Dolby Pro LogicSpeaker Arrangements for Dolby Pro Logic Using Dolby Surround Setting-up Dolby 3ch LogicGetting Ready to Use Dolby 3 Channel Logic Speaker Arrangements for Dolby 3 Channel LogicUsing the Tuner Tuning in a StationSetting the AM Tuner Interval Spacing Presetting Stations Switching between Frequency BandsThree Ways to Select a Station Changing the FM Reception Mode Using the CD Player Entering CD Operation Mode with the Remote ControlDisc indicator CD indicatorBasics of Using the CD Player Continuous Play Loading CDsPlaying a CD Locating a Track with the Remote Control Directly Selecting a TrackFast Forward / Reverse Changing Discs While PlayingOn the Remote Control Press PROGRAM/RANDOM on the Unit Programing the Playing OrderTracks On the Unit Press PROGRAM/RANDOMRandom Play Checking the ProgramChanging the Program Press the number keys 1 to 10 and +10 to select the tracksRepeating a Track or the Discs Tray Lock FunctionLocking the Trays Unlocking the TraysUsing the Cassette Deck Entering the Tape Operation Mode with the Remote ControlTape ª £ Regular Play Music ScanFast Left and Fast Right Finding the Beginning of the Current SelectionReverse Mode Reverse Mode on Reverse Mode OFFRecording Things to Know before You Start RecordingStandard Recording Check the recording direction for the tapePress Tape Control then press To pause at any time during the recording processCD Direct Recording Auto Edit RecordingRecording AM Station to Tape How to Use Dubbing Tape to Tape Recording DubbingPress Dubbing To stop dubbing, press 7STOPUsing the Timer Setting the Daily Timer Press TIMER/CLOCK againSet the time you want the Unit to turn on Set the time you want the Unit to turn offTurning the Daily Timer On and Off Setting the Volume LevelTo change the Daily Timer setting To use a Cassette Deck as the sourceSetting the Recording Timer Setting the Sleep Timer Turning the Recording Timer On and OffTo change the Sleep Timer setting To cancel the Sleep Timer settingTimer Priority Example Setting OperationRecording Timer Sleep TimerUsing the Microphone Karaoke Sing AlongSound Display Singing Along with KaraokePress FM MODE/ECHO on the Remote Control Digital EchoRecording Your Singing Microphone Mixing Playing the Microphone Sound through the SpeakersRecording Microphone Mixing Recording from the MicrophoneCare and Maintenance Compact Discs Cassette TapesMoisture Condensation General NotesTroubleshooting SymptomPossible Cause ActionSpecifications Important for mains AC line