JVC CA-D702T, GVT0004-003A manual Troubleshooting, Symptom, Possible Cause, Action

Page 47

Troubleshooting

•If you are having a problem with your System, check this list for a possible solution before calling for service.

•If you cannot solve the problem from the hints given here, or the Unit has been physically damaged, call a qualified person, such as your dealer, for service.

English

Symptom

No sound is heard.

Unable to record.

Poor radio reception

The CD skips.

Unable to operate the Remote Control.

The CD tray cannot be opened.

The CD does not play.

Operations are disabled.

The cassette door cannot be opened.

Possible Cause

Connections are incorrect, or loose.

Cassette record protect tabs are removed.

•The antenna is disconnected.

•The AM Loop Antenna is too close to the Unit.

•The FM Wire Antenna is not properly extended and positioned.

The CD is dirty or scratched.

•The path between the Remote Control and the sensor on the Unit is blocked.

•The batteries have lost their charge.

The main AC power cord is not plugged in.

The CD is upside down.

The built-in microprocessor has malfunc- tioned due to external electrical interference.

During tape playing, the power cord was unplugged.

Action

Check all connections and make corrections. (See pages 4 - 6.)

Cover holes on back edge of cassette with tape.

•Reconnect the antenna securely.

•Change the position and direction of the AM Loop Antenna.

•Extend FM Wire Antenna to the best reception position.

Clean or replace the CD.

•Remove the obstruction.

•Replace the batteries. Plug in the AC power plug.

Put the CD in with the label side up. Unplug the Unit then plug it back in.

Plug in the power cord, press , and then press 0.

43

Image 47

Contents CA-D702T If in Doubt Consult a Competent Electrician Class Laser Product Precaução Ventilação adequada Precaución el aparato debe estar bien ventiladoHow This Manual Is Organized FeaturesInstallation of the Unit Power cordTable of Contents Using the Remote Control AccessoriesSetting the Voltage Selector Switch How to Put Batteries in the Remote ControlUsing an FM 75-Ohm Antenna Cable not supplied Connecting the FM AntennaConnecting the AM Antenna Using the Supplied Wire AntennaRight Speaker Connecting the SpeakersConnecting the Optional Speakers On the Unit Connecting Auxiliary EquipmentOn the Remote Control VCR or other equipmentDisplay Demo ModeCommon Operations Turning the System On Setting the ClockTurning the Power On and Off Adjusting the VolumePress Shift Press Balance L 10 or R +10 Balance AdjustmentReinforcing the Bass Sound For private listeningSound Modes Customizing a Sound ModeFront When a Rear Speaker is ConnectedAdjusting the Rear Speaker Level Use Multi Control to adjust to any Sound Mode desiredListening to Auxiliary Equipment Turn down the volume level to Press AUX3CH Logic Accessing the Dolby Surround FunctionsDolby Surround Adjusting the level of the Rear Speakers for PRO Logic only Center Speaker ModeDelay Time Mode Adjusting the level of the Center SpeakerSpeaker Arrangements for Dolby Pro Logic Setting-up Dolby Pro LogicGetting Ready to Use Dolby Pro Logic Speaker Arrangements for Dolby 3 Channel Logic Using Dolby SurroundSetting-up Dolby 3ch Logic Getting Ready to Use Dolby 3 Channel LogicSetting the AM Tuner Interval Spacing Using the TunerTuning in a Station Three Ways to Select a Station Presetting StationsSwitching between Frequency Bands Changing the FM Reception Mode CD indicator Using the CD PlayerEntering CD Operation Mode with the Remote Control Disc indicatorPlaying a CD Basics of Using the CD Player Continuous PlayLoading CDs Changing Discs While Playing Locating a Track with the Remote Control DirectlySelecting a Track Fast Forward / ReverseOn the Unit Press PROGRAM/RANDOM On the Remote Control Press PROGRAM/RANDOM on the UnitPrograming the Playing Order TracksPress the number keys 1 to 10 and +10 to select the tracks Random PlayChecking the Program Changing the ProgramUnlocking the Trays Repeating a Track or the DiscsTray Lock Function Locking the TraysTape ª £ Using the Cassette DeckEntering the Tape Operation Mode with the Remote Control Finding the Beginning of the Current Selection Regular PlayMusic Scan Fast Left and Fast RightReverse Mode on Reverse Mode OFF Reverse ModeThings to Know before You Start Recording RecordingTo pause at any time during the recording process Standard RecordingCheck the recording direction for the tape Press Tape Control then pressRecording AM Station to Tape CD Direct RecordingAuto Edit Recording To stop dubbing, press 7STOP How to Use DubbingTape to Tape Recording Dubbing Press DubbingUsing the Timer Set the time you want the Unit to turn off Setting the Daily TimerPress TIMER/CLOCK again Set the time you want the Unit to turn onTo use a Cassette Deck as the source Turning the Daily Timer On and OffSetting the Volume Level To change the Daily Timer settingSetting the Recording Timer To cancel the Sleep Timer setting Setting the Sleep TimerTurning the Recording Timer On and Off To change the Sleep Timer settingSleep Timer Timer PriorityExample Setting Operation Recording TimerSinging Along with Karaoke Using the MicrophoneKaraoke Sing Along Sound DisplayRecording Your Singing Press FM MODE/ECHO on the Remote ControlDigital Echo Recording from the Microphone Microphone MixingPlaying the Microphone Sound through the Speakers Recording Microphone MixingGeneral Notes Care and MaintenanceCompact Discs Cassette Tapes Moisture CondensationAction TroubleshootingSymptom Possible CauseSpecifications Important for mains AC line