JVC RX-5030VBK manual Turning Off the Sound Temporarily-Muting, Changing the Display Brightness

Page 15

After using the headphones

1Press SPEAKERS ON/OFF on the front panel to activate the speakers.

The H.PHONE indicator goes off and the SPK indicator lights up.

2Disconnect the headphones.

CAUTION:

Be sure to turn down the volume

•Before connecting or putting on headphones, as high volume can damage both the headphones and your hearing.

•Before turning on speakers again, as high volume may be output from the speakers.

Turning Off the Sound

Temporarily—Muting

You can turn off the volume temporarily.

Press MUTING on the remote control to mute the sound through all speakers or headphones.

•“MUTING” appears on the display and the volume turns off (the VOLUME indicator goes off).

Changing the Display Brightness—

DIMMER

You can dim the display.

Press DIMMER.

•Each time you press the button, the display dims and brightens alternately.

Turning Off the Power

with the Sleep Timer

You can fall asleep while listening to music—Sleep Timer.

Press SLEEP on the remote control repeatedly.

•The SLEEP indicator lights up on the display.

Each time you press the button, the shut-off time changes in

10 minute intervals as follows:

10

 

20

 

30

 

 

 

40

 

 

50

 

 

60

 

 

 

 

 

 

 

 

0

(Canceled)

 

 

90

 

 

80

 

 

70

 

 

 

 

To restore the sound, press MUTING again. The VOLUME indicator lights up on the display.

•Turning MASTER VOLUME control on the front panel or pressing VOLUME +/– on the remote control also restores the sound.

When the shut-off time comes, the receiver turns off

automatically.

To check or change the shut-off time, press SLEEP once. The remaining time (in minutes) until the shut-off time appears.

•To change the shut-off time, press SLEEP repeatedly.

To cancel the Sleep Timer, press SLEEP repeatedly until

“SLEEP 0MIN” appears on the display. (The SLEEP indicator goes off.)

•Turning off the power also cancels the Sleep Timer.

 

Basic adjustment auto memory

For recording

 

This receiver memorizes sound settings for each source

You can record any sources playing through the receiver to a

 

when—:

cassette deck (or a CD recorder) connected to the

 

• you turn off the power,

TAPE/CDR jacks and the VCR connected to the VCR jacks

 

• you change the source, and

at the same time.

 

• you assign the source name.

While recording, you can listen to the selected sound source

 

 

 

at whatever sound level you like without affecting the sound

 

When you change the source, the memorized settings for

levels of the recording.

 

the newly selected source are automatically recalled.

Note:

 

 

The following can be stored for each source:

 

The output volume level, tone adjustment (see page 18), and

 

• Input attenuator mode (see page 16)

 

Surround/DSP modes (see pages 24 and 25) do not affect the

 

• Tone adjustment (see page 18)

 

recording.

 

• Speaker output level (see pages 18 and 19)

 

 

 

 

• Surround/DSP mode selection (see pages 24 and 25)

 

 

 

Notes:

 

 

 

 

• You cannot assign and store different settings for digital input

 

 

 

mode and analog input mode.

 

 

 

• If the source is FM or AM, you can assign a different setting for

 

 

 

each band.

 

 

 

 

 

 

 

12

Page 14 Page 16
Image 15
Page 14 Page 16
Contents RX-5030VBK Page RX-5030VBK Setting the Voltage Selector Switch Before InstallationPrecautions Checking the Supplied AccessoriesTable of Contents Parts Identification Front PanelDisplay Rear Panel Remote ControlFM antenna connection Connecting the AM and FM AntennasGetting Started AM antenna connectionHow to connect the subwoofer Connecting the Speakers and SubwooferConnection diagram Speaker layout diagram How to connect speaker cordsIf your audio components have a Compu Link jack Connecting Audio/Video ComponentsGetting Started Analog Connections Audio component connectionsVideo component connections VCRDVD Replace the cover Connecting the Power CordPutting Batteries in the Remote Control Plug the power cord into an AC outletSelecting the Source to Play Turning On the PowerFront panel Remote control Basic OperationsPress Speakers ON/OFF on the front Panel Adjusting the VolumeBasic Operations Selecting Different Sources for Picture SoundChanging the Display Brightness Turning Off the Power With the Sleep TimerBasic adjustment auto memory For recording Turning Off the Sound Temporarily-MutingBasic Settings Using Multi JOG Dial Basic SettingsDynamic range compression-DCOMPRESSION Selecting the Digital Input TerminalsCrossover frequency-CROSSOVER Low Frequency Effect attenuator-LFE AttenuatePress Input Digital Basic SettingsSelecting the Analog or Digital Input Mode Select digital input modeTo turn on the subwoofer, press the button again Sound AdjustmentsTurn Multi JOG dial to select an Appropriate value Sound AdjustmentsSound Adjustments Using Multi JOG Dial Press AdjustSound Adjustments Using Remote Control Adjusting Speaker Output Levels Using Test TonePress Sound Press Test Select a speaker you want to adjustAdjusting Subwoofer Output Level Make sure the subwoofer setting is set to YES seeTuner Operations Setting the AM TunerUsing Preset Tuning Tuning in to Stations ManuallyStation previously stored will be erased Selecting the FM Reception ModeTuning in to a Preset Station On the front panel Tuner OperationsTypical multi-channel 5.1 channel reproduction Creating Realistic Sound FieldsSurround modes DSP modesHall Creating Realistic Sound FieldsCreating sound field All Channel Stereo reproductionDolby Digital Using Surround ModesSelect the source you want to listen to and start playing Press SurroundTo adjust the speaker output level and the effect level for Using DSP ModesSignal and speaker indicators on the display Adjustable items and selected Surround/DSP modeSynchronized Recording Compu Link Remote Control SystemPress the play 3 button on the CD player Automatic Source SelectionVideo cable connection AV Compu Link Remote Control SystemConnecting procedure AV Compu Link connectionOne-Touch DVD Play Automatic Selection of the TV Input ModeAutomatic Power On/Off One-Touch Video PlayTuner Sound AdjustmentOperating JVC’s Audio/Video Components Operating Audio ComponentsCD recorder CD playerCassette deck CD changerOperating JVC’s Audio/Video Components Operating Video ComponentsDVD player To change the transmission signals for operating a TV Operating Other Manufacturers’ Video EquipmentTry to operate your TV by pressing Try to operate your DVD player by pressing To change the transmission signals for operating a VCROperating Other Manufacturers’ Video Equipment Try to operate your VCR by pressingProblem Possible Cause Solution TroubleshootingAmplifier SpecificationsFM tuner IHF AM tunerGeneral AUDIO/VIDEO

RX-5030VBK specifications

The JVC RX-5030VBK is a remarkable stereo receiver that exemplifies quality and versatility, catering to both music enthusiasts and casual listeners. Launched as part of JVC's esteemed audio line-up, this model combines classic design with modern technology to deliver powerful audio performance.

One of the key features of the RX-5030VBK is its robust power output. The receiver boasts 100 watts per channel, ensuring that it can drive a wide range of speakers and fill any room with rich, immersive sound. This level of power is essential for providing clear audio even at higher volumes, making it suitable for everything from relaxed listening sessions to lively gatherings.

The RX-5030VBK also includes a variety of connectivity options, allowing for seamless integration with multiple audio sources. It features multiple stereo inputs, including phono, which is a bonus for vinyl lovers who appreciate the warmth and depth of analog sound. Additionally, the device includes inputs for CD players, cassette decks, and other auxiliary devices, making it a versatile addition to any home audio setup.

Modern technology is also present in this receiver with its built-in AM/FM tuner, giving users access to a wide range of radio stations. The digital tuner offers easy station tuning and preset memory options, ensuring quick access to favorite channels. Furthermore, the receiver is designed with user-friendly controls, making navigation straightforward, even for those who may not be tech-savvy.

Another standout characteristic is the RX-5030VBK's functionality with home theater systems. This stereo receiver can enhance the audio experience when paired with compatible surround sound setups, offering a more immersive experience for movies and games. Its versatility makes it an ideal choice for those looking to enhance their entertainment systems without needing multiple separate components.

In conclusion, the JVC RX-5030VBK showcases a harmonious blend of power, versatility, and user-friendliness. With its impressive sound output, multiple connectivity options, and modern features, it stands out as a reliable choice for anyone seeking to elevate their audio experience. Whether you're spinning vinyl, tuning into your favorite radio station, or enjoying a movie night, the RX-5030VBK delivers quality sound that meets a variety of listening needs.
Top Page Image Contents