JVC RX-5030VBK manual Specifications, Amplifier

Page 38

Specifications

Designs & specifications are subject to change without notice.

Amplifier

Output Power:

At Stereo operation:

 

 

Front channels:

100 W* per channel, min. RMS, driven into 8 Ω at 1 kHz with no

 

 

more than 0.9% total harmonic distortion. (IEC268-3/DIN)

 

At Surround operation:

 

 

Front channels:

100 W per channel, min. RMS, driven into 8 Ω at 1 kHz with no

 

 

more than 0.8% total harmonic distortion.

 

Center channel:

100 W, min. RMS, driven into 8 Ω at 1 kHz, with no more than

 

 

0.8% total harmonic distortion.

 

Surround channels:

100 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no

 

 

more than 0.8% total harmonic distortion.

 

(* Measured on AC 110 V, 127 V, 220 V, and 240 V)

Audio

 

 

 

Audio Input Sensitivity/Impedance (1 kHz):

CD, TAPE/CDR, VCR, TV SOUND, DVD:

220 mV/47 kΩ

Audio Input (DIGITAL IN)* :

Coaxial:

DIGITAL 1 (DVD):

0.5 V (p-p)/75 Ω

 

Optical:

DIGITAL 2 (CD):

–21 dBm to –15 dBm (660 nm ±30 nm)

 

* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround

 

(with sampling frequency—32 kHz, 44.1 kHz, 48 kHz).

Audio Output Level:

TAPE/CDR, VCR:

 

220 mV

Signal-to-Noise Ratio (’66 IHF/DIN):

CD, TAPE/CDR, VCR, TV SOUND, DVD:

87 dB/67 dB

Frequency Response (8 Ω):

CD, TAPE/CDR, VCR, TV SOUND, DVD:

20 Hz to 20 kHz (±1 dB)

Tone Control:

Bass (100 Hz):

 

±10 dB

 

Treble (10 kHz):

 

±10 dB

Video

 

 

 

Video Input Sensitivity/Impedance:

 

 

 

Composite video:

DVD, VCR:

 

1 V (p-p)/75 Ω

Video Output Level/Impedance:

 

 

 

Composite video:

VCR, MONITOR OUT:

1 V (p-p)/75 Ω

Synchronization:

Negative

 

 

Signal-to-Noise Ratio:

45 dB

 

 

35

Page 37 Page 39
Image 38
Page 37 Page 39
Contents RX-5030VBK Page RX-5030VBK Checking the Supplied Accessories Before InstallationPrecautions Setting the Voltage Selector SwitchTable of Contents Display Parts IdentificationFront Panel Remote Control Rear PanelAM antenna connection Connecting the AM and FM AntennasGetting Started FM antenna connectionHow to connect speaker cords Connecting the Speakers and SubwooferConnection diagram Speaker layout diagram How to connect the subwooferAnalog Connections Audio component connections Connecting Audio/Video ComponentsGetting Started If your audio components have a Compu Link jackDVD Video component connectionsVCR Plug the power cord into an AC outlet Connecting the Power CordPutting Batteries in the Remote Control Replace the coverBasic Operations Turning On the PowerFront panel Remote control Selecting the Source to PlaySelecting Different Sources for Picture Sound Adjusting the VolumeBasic Operations Press Speakers ON/OFF on the front PanelTurning Off the Sound Temporarily-Muting Turning Off the Power With the Sleep TimerBasic adjustment auto memory For recording Changing the Display BrightnessBasic Settings Basic Settings Using Multi JOG DialLow Frequency Effect attenuator-LFE Attenuate Selecting the Digital Input TerminalsCrossover frequency-CROSSOVER Dynamic range compression-DCOMPRESSIONSelect digital input mode Basic SettingsSelecting the Analog or Digital Input Mode Press Input DigitalSound Adjustments To turn on the subwoofer, press the button againPress Adjust Sound AdjustmentsSound Adjustments Using Multi JOG Dial Turn Multi JOG dial to select an Appropriate valuePress Sound Sound Adjustments Using Remote ControlAdjusting Speaker Output Levels Using Test Tone Make sure the subwoofer setting is set to YES see Select a speaker you want to adjustAdjusting Subwoofer Output Level Press TestTuning in to Stations Manually Setting the AM TunerUsing Preset Tuning Tuner OperationsTuner Operations Selecting the FM Reception ModeTuning in to a Preset Station On the front panel Station previously stored will be erasedDSP modes Creating Realistic Sound FieldsSurround modes Typical multi-channel 5.1 channel reproductionAll Channel Stereo reproduction Creating Realistic Sound FieldsCreating sound field HallPress Surround Using Surround ModesSelect the source you want to listen to and start playing Dolby DigitalAdjustable items and selected Surround/DSP mode Using DSP ModesSignal and speaker indicators on the display To adjust the speaker output level and the effect level forAutomatic Source Selection Compu Link Remote Control SystemPress the play 3 button on the CD player Synchronized RecordingAV Compu Link connection AV Compu Link Remote Control SystemConnecting procedure Video cable connectionOne-Touch Video Play Automatic Selection of the TV Input ModeAutomatic Power On/Off One-Touch DVD PlayOperating Audio Components Sound AdjustmentOperating JVC’s Audio/Video Components TunerCD changer CD playerCassette deck CD recorderDVD player Operating JVC’s Audio/Video ComponentsOperating Video Components Try to operate your TV by pressing To change the transmission signals for operating a TVOperating Other Manufacturers’ Video Equipment Try to operate your VCR by pressing To change the transmission signals for operating a VCROperating Other Manufacturers’ Video Equipment Try to operate your DVD player by pressingTroubleshooting Problem Possible Cause SolutionSpecifications AmplifierGeneral FM tuner IHFAM tuner AUDIO/VIDEO

RX-5030VBK specifications

The JVC RX-5030VBK is a remarkable stereo receiver that exemplifies quality and versatility, catering to both music enthusiasts and casual listeners. Launched as part of JVC's esteemed audio line-up, this model combines classic design with modern technology to deliver powerful audio performance.

One of the key features of the RX-5030VBK is its robust power output. The receiver boasts 100 watts per channel, ensuring that it can drive a wide range of speakers and fill any room with rich, immersive sound. This level of power is essential for providing clear audio even at higher volumes, making it suitable for everything from relaxed listening sessions to lively gatherings.

The RX-5030VBK also includes a variety of connectivity options, allowing for seamless integration with multiple audio sources. It features multiple stereo inputs, including phono, which is a bonus for vinyl lovers who appreciate the warmth and depth of analog sound. Additionally, the device includes inputs for CD players, cassette decks, and other auxiliary devices, making it a versatile addition to any home audio setup.

Modern technology is also present in this receiver with its built-in AM/FM tuner, giving users access to a wide range of radio stations. The digital tuner offers easy station tuning and preset memory options, ensuring quick access to favorite channels. Furthermore, the receiver is designed with user-friendly controls, making navigation straightforward, even for those who may not be tech-savvy.

Another standout characteristic is the RX-5030VBK's functionality with home theater systems. This stereo receiver can enhance the audio experience when paired with compatible surround sound setups, offering a more immersive experience for movies and games. Its versatility makes it an ideal choice for those looking to enhance their entertainment systems without needing multiple separate components.

In conclusion, the JVC RX-5030VBK showcases a harmonious blend of power, versatility, and user-friendliness. With its impressive sound output, multiple connectivity options, and modern features, it stands out as a reliable choice for anyone seeking to elevate their audio experience. Whether you're spinning vinyl, tuning into your favorite radio station, or enjoying a movie night, the RX-5030VBK delivers quality sound that meets a variety of listening needs.
Top Page Image Contents