JVC RX-772VBK manual Connecting Audio/Video Components, Audio component connections

Page 11

Connecting Audio/Video Components

You can connect the following audio/video components to this receiver using cables with RCA pin plugs (not supplied). Refer also to the manuals supplied with your components. If you want to connect a component not listed in the table below, refer to the manual supplied with it.

Audio Components

Video Components

 

 

 

 

•

Turntable

•

TV

 

 

 

 

•

CD player

•

VCR

 

 

 

 

•

Cassette deck

•

Video disc player

Note:

•If you connect a sound-enhancing device such as a graphic equalizer between the source components and this receiver, the sound output through this receiver may be distorted.

•Any turntables incorporating a small-output cartridge such as an MC (moving-coil type) must be connected to this receiver through a commercial head amplifier or step-up transformer. Direct connection may result in insufficient volume.

Audio component connections

GND

CD player

To audio output

If an earth cable is provided for your turntable, connect the cable to the screw marked GND on the rear panel.

To audio output

AUDIO

RIGHT LEFT

PHONO

 

CD

 

OUT

OUT

(REC)

(REC)

VCR

VCR

 

IN

IN

(PLAY)

(PLAY)

 

Turntable

VIDEO VIDEO

Cassette deck

To audio input

To audio output

TV

SOUND MONITOR OUT

OUT

(REC)

TAPE

IN

(PLAY)

VIDEO

If your audio components have a COMPU LINK-3 terminal

The COMPU LINK remote control system allows you to control other JVC audio components from the receiver or vice versa.

Connect your audio components and the receiver with the cable (monaural mini-plug supplied with those components) as well as the connection above.

For detailed information about the connection and the COMPU LINK-3 remote control system, see page 35.

Note:

The COMPU LINK-3 remote control system is the upgraded version of the COMPU LINK-1 and COMPU LINK-2. Even if your component has the COMPU LINK-1 or COMPU LINK-2 jacks, you can still connect it in the COMPU LINK-3 remote control system, but some functions may not work correctly.

Page 8

Page 10 Page 12
Image 11
Page 10 Page 12
Contents RX-772VBK To Reduce the Risk of Electric Shock Wide Normal Phantom OFF Table of Contents Getting Started Before InstallationChecking the Supplied Accessories Front Panel Switches, Buttons and ControlsRemote Control Unit Remote ControlAM Antenna Connections Connecting the FM and AM AntennasFM Antenna Connections Connecting the front speakers Connecting the SpeakersClose the terminal Connecting the rear and center speakersConnecting the subwoofer speaker Open the terminal and then insert the speaker signal cableIf your audio components have a Compu LINK-3 terminal Connecting Audio/Video ComponentsAudio component connections Audio Components Video ComponentsIf your video components have an AV Compu Link terminal Video component connectionsR03 UM-4/AAA 24F Connecting the Power CordPutting Batteries in the Remote Control Selecting the Source to Play Turning the Power On and OffBasic Operations On the front panel only Adjusting the VolumeSelecting the Front Speakers Recording a Source Listening with HeadphonesMuting the Sound Listening at Low Volume Loudness Basic SettingsAdjusting the Front Speaker Output Balance From the remote control Press Sleep repeatedly Using the Sleep TimerTo cancel the Sleep Timer Small Selecting the Center Speaker SizeLarge Small no LargeExamples Using Visual ConfirmationOne Touch Operation Using the One Touch OperationTo store the sound settings Press ONE Touch Operation To cancel the One Touch Operation functionReceiving Radio Broadcasts Tuning in Stations ManuallyUsing Preset Tuning To store the preset stationsMono Selecting the FM Reception ModeTo tune in a preset station AutoAvailable characters Assigning Names to Preset StationsWhen a character you want appears, press Control #or @ Press Control %/ Þto select a characterRock Musical Movie Country SEA OFF Usermode Jazz Using the SEA ModesSelecting Your Favorite SEA Mode 100 1k 10k Creating Your Own SEA ModeTo recall your own SEA adjustment To erase a stored adjustmentPrologic 3CHLOGIC Hall Surr OFF Using the Surround ProcessorUsing JVC’s Hall Surround What is surround?Delay DelayDelay 1 Delay Delay 4 Delay Front Speaker Rear Speaker Speaker arrangements for Dolby SurroundFront Speaker Rear Speaker Center Speaker This caseWide Normal Phantom Preparing for Dolby SurroundFront speakers If necessary, adjust the speaker output balance as followsSOFT2 SOFT1 Flat SHARP1 SHARP2 SpeakersPress Test again to stop the test tone Press Test to start checking the speaker output balanceRemote Control Surround Off Using Dolby SurroundMenu function buttons Using the On-Screen Display to Control the ReceiverFrom the remote control Press Menu Press %/ Þto move To SETTING, then press @ / #Listening at Low Volume Loudness Also see Press %/ Þto move to SEA, then press @/ # Press %/ Þto move To SEA Adjust then press @/ #Press %/ Þ/ @ / # to adjust the SEA mode as you want Press %/ Þto move to TUNER, then press @/ #For Dolby Pro Logic Press %/ Þto move to Surround ADJUST, then press @ / #Press %/ Þto move To SURROUND, then press @/ # Press %/ Þ to move to one of the surround modesAutomatic Source Selection Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver CD player Cassette deckWhen using a VHS VCR, connect it as follows See also AV Compu Link Remote Control SystemTo video input 1 S-video jack using S-video cable To video input 2 jack using video cableOne-Touch Video Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off CD player-changer TunerSound control section Amplifier CD playerCassette deck Turntable10, 0, +10 TV/CATV/SAT PowerTV Volume + Channel +Try to operate your VCR by pressing VCR Power VCR PowerManufacturers’ codes for TV Manufacturers’ codes for Catv converters 056, 177Yamaha 019 Zenith 016 Manufacturers’ codes for VCR Manufacturers’ codes for satellite tunerXR-1000 000, 035 Yamaha 038 Zenith 033, 034 149, 212Problem Possible Cause TroubleshootingVideo SpecificationsAmplifier General FM tuner IHFAM tuner If you ship the product QualityserviceFactory Service Center Locations Limited Warranty AUDIO-2 0497OFYOTKJEM

RX-772VBK specifications

The JVC RX-772VBK is a versatile home theater receiver designed to deliver an immersive audio experience for music and movie enthusiasts alike. With a user-friendly interface and an array of cutting-edge features, the RX-772VBK stands out as a robust choice for those looking to enhance their home entertainment system.

One of the most notable features of the RX-772VBK is its powerful amplification. With a robust output of 100 watts per channel, this receiver can drive a wide range of speakers and produce clear, dynamic sound at any volume level. Whether it’s blasting your favorite music or creating a rich soundscape for movies, the RX-772VBK handles it with ease.

Connectivity is another key area where the RX-772VBK shines. It includes multiple HDMI inputs, allowing you to connect various devices such as Blu-ray players, gaming consoles, and streaming devices seamlessly. The receiver supports 4K video pass-through, ensuring that your high-definition content looks its best. Additionally, it features built-in Bluetooth technology, enabling users to wirelessly stream music from smartphones, tablets, or laptops.

The RX-772VBK also incorporates advanced audio processing technologies. It includes Dolby TrueHD and DTS-HD Master Audio support, which provides a cinematic surround sound experience that envelops listeners. The receiver comes with a built-in equalizer, giving users the ability to tailor sound output to their personal preferences and the acoustics of their viewing room.

Ease of use is a defining characteristic of the RX-772VBK. The intuitive on-screen setup guide simplifies installation, while the remote control provides straightforward access to settings and input selection. The receiver also features a sleep timer and customizable sound modes, enhancing user experience even further.

In addition to its performance, the RX-772VBK is designed with aesthetics in mind. Its sleek, black finish and modern design ensure that it complements any home decor, making it a welcome addition to your living space.

In summary, the JVC RX-772VBK is an impressive home theater receiver that brings together strong amplification, versatile connectivity, and advanced audio technologies. Whether you’re watching movies, listening to music, or gaming, this receiver promises to elevate your audio experience to new heights.
Top Page Image Contents