JVC RX-772VBK manual FM tuner IHF, AM tuner, General

Page 51

FM tuner (IHF)

Tuning Range		87.5 MHz to 108.0 MHz
Usable Sensitivity	Monaural	10.8 dBf (0.95 µV/75 ohms)
50 dB Quieting Sensitivity	Monaural	16.3 dBf (1.8 µV/75 ohms)
	Stereo	38.3 dBf (22.5 µV/75 ohms)
Signal-to-Noise Ratio	Monaural	80 dB at 85 dBf
(IHF-A weighted)	Stereo	73 dB at 85 dBf
Total Harmonic Distortion	Monaural	0.15 % at 1 kHz
	Stereo	0.2 % at 1 kHz
Stereo Separation at REC OUT		40 dB at 1 kHz
Capture Ratio		1.5 dB (10 mV)
Alternate Channel Selectivity		60 dB: (±400 kHz)
Frequency Response		30 Hz to 15 kHz: (+0.5 dB, –3 dB)

AM tuner

Tuning Range		530 kHz to 1,710 kHz
Usable Sensitivity	Loop antenna	300 µV/m
	External antenna	30 µV
Signal-to-Noise Ratio		50 dB (100 mV/m)

General

Power Requirements	AC 120V , 60 Hz
Power Consumption	300 watts/400 VA
	2 watts (in standby mode)
Dimensions (W x H x D)	17 3/16 x 6 3/16 x 16 1/4 inches
	(435 x 156.5 x 412 mm)
Mass	22.3 lbs (10.1 kg)
	Designs & specifications are subject to change without notice.

Page 48

Image 51

Contents RX-772VBK To Reduce the Risk of Electric Shock Wide Normal Phantom OFF Table of Contents Before Installation Checking the Supplied AccessoriesGetting Started Front Panel Switches, Buttons and ControlsRemote Control Unit Remote ControlConnecting the FM and AM Antennas FM Antenna ConnectionsAM Antenna Connections Connecting the front speakers Connecting the SpeakersClose the terminal Connecting the rear and center speakersConnecting the subwoofer speaker Open the terminal and then insert the speaker signal cableIf your audio components have a Compu LINK-3 terminal Connecting Audio/Video ComponentsAudio component connections Audio Components Video ComponentsIf your video components have an AV Compu Link terminal Video component connectionsConnecting the Power Cord Putting Batteries in the Remote ControlR03 UM-4/AAA 24F Turning the Power On and Off Basic OperationsSelecting the Source to Play Adjusting the Volume Selecting the Front SpeakersOn the front panel only Listening with Headphones Muting the SoundRecording a Source Basic Settings Adjusting the Front Speaker Output BalanceListening at Low Volume Loudness Using the Sleep Timer To cancel the Sleep TimerFrom the remote control Press Sleep repeatedly Small Selecting the Center Speaker SizeLarge Small no LargeExamples Using Visual ConfirmationOne Touch Operation Using the One Touch OperationTo store the sound settings Press ONE Touch Operation To cancel the One Touch Operation functionReceiving Radio Broadcasts Tuning in Stations ManuallyUsing Preset Tuning To store the preset stationsMono Selecting the FM Reception ModeTo tune in a preset station AutoAvailable characters Assigning Names to Preset StationsWhen a character you want appears, press Control #or @ Press Control %/ Þto select a characterUsing the SEA Modes Selecting Your Favorite SEA ModeRock Musical Movie Country SEA OFF Usermode Jazz 100 1k 10k Creating Your Own SEA ModeTo recall your own SEA adjustment To erase a stored adjustmentPrologic 3CHLOGIC Hall Surr OFF Using the Surround ProcessorUsing JVC’s Hall Surround What is surround?Delay Delay 1 Delay Delay 4 DelayDelay Front Speaker Rear Speaker Speaker arrangements for Dolby SurroundFront Speaker Rear Speaker Center Speaker This caseWide Normal Phantom Preparing for Dolby SurroundFront speakers If necessary, adjust the speaker output balance as followsSOFT2 SOFT1 Flat SHARP1 SHARP2 SpeakersPress Test again to stop the test tone Press Test to start checking the speaker output balanceRemote Control Surround Off Using Dolby SurroundMenu function buttons Using the On-Screen Display to Control the ReceiverFrom the remote control Press Menu Press %/ Þto move To SETTING, then press @ / #Listening at Low Volume Loudness Also see Press %/ Þto move to SEA, then press @/ # Press %/ Þto move To SEA Adjust then press @/ #Press %/ Þ/ @ / # to adjust the SEA mode as you want Press %/ Þto move to TUNER, then press @/ #For Dolby Pro Logic Press %/ Þto move to Surround ADJUST, then press @ / #Press %/ Þto move To SURROUND, then press @/ # Press %/ Þ to move to one of the surround modesAutomatic Source Selection Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver CD player Cassette deckWhen using a VHS VCR, connect it as follows See also AV Compu Link Remote Control SystemTo video input 1 S-video jack using S-video cable To video input 2 jack using video cableAutomatic Selection of TV’s Input Mode Automatic Power On/OffOne-Touch Video Play CD player-changer TunerSound control section Amplifier CD playerCassette deck Turntable10, 0, +10 TV/CATV/SAT PowerTV Volume + Channel +Try to operate your VCR by pressing VCR Power VCR PowerManufacturers’ codes for TV 056, 177 Yamaha 019 Zenith 016Manufacturers’ codes for Catv converters Manufacturers’ codes for VCR Manufacturers’ codes for satellite tunerXR-1000 000, 035 Yamaha 038 Zenith 033, 034 149, 212Problem Possible Cause TroubleshootingSpecifications AmplifierVideo FM tuner IHF AM tunerGeneral Qualityservice Factory Service Center LocationsIf you ship the product Limited Warranty AUDIO-2 0497OFYOTKJEM

RX-772VBK specifications

The JVC RX-772VBK is a versatile home theater receiver designed to deliver an immersive audio experience for music and movie enthusiasts alike. With a user-friendly interface and an array of cutting-edge features, the RX-772VBK stands out as a robust choice for those looking to enhance their home entertainment system.

One of the most notable features of the RX-772VBK is its powerful amplification. With a robust output of 100 watts per channel, this receiver can drive a wide range of speakers and produce clear, dynamic sound at any volume level. Whether it’s blasting your favorite music or creating a rich soundscape for movies, the RX-772VBK handles it with ease.

Connectivity is another key area where the RX-772VBK shines. It includes multiple HDMI inputs, allowing you to connect various devices such as Blu-ray players, gaming consoles, and streaming devices seamlessly. The receiver supports 4K video pass-through, ensuring that your high-definition content looks its best. Additionally, it features built-in Bluetooth technology, enabling users to wirelessly stream music from smartphones, tablets, or laptops.

The RX-772VBK also incorporates advanced audio processing technologies. It includes Dolby TrueHD and DTS-HD Master Audio support, which provides a cinematic surround sound experience that envelops listeners. The receiver comes with a built-in equalizer, giving users the ability to tailor sound output to their personal preferences and the acoustics of their viewing room.

Ease of use is a defining characteristic of the RX-772VBK. The intuitive on-screen setup guide simplifies installation, while the remote control provides straightforward access to settings and input selection. The receiver also features a sleep timer and customizable sound modes, enhancing user experience even further.

In addition to its performance, the RX-772VBK is designed with aesthetics in mind. Its sleek, black finish and modern design ensure that it complements any home decor, making it a welcome addition to your living space.

In summary, the JVC RX-772VBK is an impressive home theater receiver that brings together strong amplification, versatile connectivity, and advanced audio technologies. Whether you’re watching movies, listening to music, or gaming, this receiver promises to elevate your audio experience to new heights.