JVC RX-772VBK manual Getting Started, Before Installation, Checking the Supplied Accessories

Page 5

Getting Started

This section explains how to connect audio/video components and speakers to the receiver, and how to connect the power supply.

Before Installation

General

•Be sure your hands are dry.

•Turn the power off to all components.

•Read the manuals supplied with the components you are going to connect.

Locations

•Install the receiver in a location that is level and protected from moisture.

•The temperature around the receiver must be between 23˚ and 95˚ F (–5˚ and 35˚ C).

•Make sure there is good ventilation around the receiver. Poor ventilation could cause overheating and damage the receiver.

Handling the receiver

•Do not insert any metal object into the receiver.

•Do not disassemble the receiver or remove screws, covers, or cabinet.

•Do not expose the receiver to rain or moisture.

Checking the Supplied Accessories

Check to be sure you have all of the following items, which are supplied with the receiver.

The number in the parenthesis indicates the quantity of the pieces supplied.

•Remote Control (1)

•Batteries (2)

•AM Loop Antenna (1)

•FM Antenna (1)

If anything is missing, contact your dealer immediately.

Page 2

Page 4 Page 6
Image 5
Page 4 Page 6
Contents RX-772VBK To Reduce the Risk of Electric Shock Wide Normal Phantom OFF Table of Contents Getting Started Before InstallationChecking the Supplied Accessories Front Panel Switches, Buttons and ControlsRemote Control Unit Remote ControlAM Antenna Connections Connecting the FM and AM AntennasFM Antenna Connections Connecting the front speakers Connecting the SpeakersConnecting the subwoofer speaker Connecting the rear and center speakersOpen the terminal and then insert the speaker signal cable Close the terminalAudio component connections Connecting Audio/Video ComponentsAudio Components Video Components If your audio components have a Compu LINK-3 terminalIf your video components have an AV Compu Link terminal Video component connectionsR03 UM-4/AAA 24F Connecting the Power CordPutting Batteries in the Remote Control Selecting the Source to Play Turning the Power On and OffBasic Operations On the front panel only Adjusting the VolumeSelecting the Front Speakers Recording a Source Listening with HeadphonesMuting the Sound Listening at Low Volume Loudness Basic SettingsAdjusting the Front Speaker Output Balance From the remote control Press Sleep repeatedly Using the Sleep TimerTo cancel the Sleep Timer Large Small no Selecting the Center Speaker SizeLarge SmallExamples Using Visual ConfirmationTo store the sound settings Press ONE Touch Operation Using the One Touch OperationTo cancel the One Touch Operation function One Touch OperationUsing Preset Tuning Tuning in Stations ManuallyTo store the preset stations Receiving Radio BroadcastsTo tune in a preset station Selecting the FM Reception ModeAuto MonoWhen a character you want appears, press Control #or @ Assigning Names to Preset StationsPress Control %/ Þto select a character Available charactersRock Musical Movie Country SEA OFF Usermode Jazz Using the SEA ModesSelecting Your Favorite SEA Mode To recall your own SEA adjustment Creating Your Own SEA ModeTo erase a stored adjustment 100 1k 10kUsing JVC’s Hall Surround Using the Surround ProcessorWhat is surround? Prologic 3CHLOGIC Hall Surr OFFDelay DelayDelay 1 Delay Delay 4 Delay Front Speaker Rear Speaker Center Speaker Speaker arrangements for Dolby SurroundThis case Front Speaker Rear SpeakerWide Normal Phantom Preparing for Dolby SurroundSOFT2 SOFT1 Flat SHARP1 SHARP2 If necessary, adjust the speaker output balance as followsSpeakers Front speakersPress Test again to stop the test tone Press Test to start checking the speaker output balanceRemote Control Surround Off Using Dolby SurroundFrom the remote control Press Menu Using the On-Screen Display to Control the ReceiverPress %/ Þto move To SETTING, then press @ / # Menu function buttonsListening at Low Volume Loudness Also see Press %/ Þ/ @ / # to adjust the SEA mode as you want Press %/ Þto move To SEA Adjust then press @/ #Press %/ Þto move to TUNER, then press @/ # Press %/ Þto move to SEA, then press @/ #Press %/ Þto move To SURROUND, then press @/ # Press %/ Þto move to Surround ADJUST, then press @ / #Press %/ Þ to move to one of the surround modes For Dolby Pro LogicRemote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemCD player Cassette deck Automatic Source SelectionTo video input 1 S-video jack using S-video cable AV Compu Link Remote Control SystemTo video input 2 jack using video cable When using a VHS VCR, connect it as follows See alsoOne-Touch Video Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off Sound control section Amplifier TunerCD player CD player-changerCassette deck TurntableTV Volume + TV/CATV/SAT PowerChannel + 10, 0, +10Try to operate your VCR by pressing VCR Power VCR PowerManufacturers’ codes for TV Manufacturers’ codes for Catv converters 056, 177Yamaha 019 Zenith 016 Manufacturers’ codes for VCR Manufacturers’ codes for satellite tunerXR-1000 000, 035 Yamaha 038 Zenith 033, 034 149, 212Problem Possible Cause TroubleshootingVideo SpecificationsAmplifier General FM tuner IHFAM tuner If you ship the product QualityserviceFactory Service Center Locations Limited Warranty AUDIO-2 0497OFYOTKJEM

RX-772VBK specifications

The JVC RX-772VBK is a versatile home theater receiver designed to deliver an immersive audio experience for music and movie enthusiasts alike. With a user-friendly interface and an array of cutting-edge features, the RX-772VBK stands out as a robust choice for those looking to enhance their home entertainment system.

One of the most notable features of the RX-772VBK is its powerful amplification. With a robust output of 100 watts per channel, this receiver can drive a wide range of speakers and produce clear, dynamic sound at any volume level. Whether it’s blasting your favorite music or creating a rich soundscape for movies, the RX-772VBK handles it with ease.

Connectivity is another key area where the RX-772VBK shines. It includes multiple HDMI inputs, allowing you to connect various devices such as Blu-ray players, gaming consoles, and streaming devices seamlessly. The receiver supports 4K video pass-through, ensuring that your high-definition content looks its best. Additionally, it features built-in Bluetooth technology, enabling users to wirelessly stream music from smartphones, tablets, or laptops.

The RX-772VBK also incorporates advanced audio processing technologies. It includes Dolby TrueHD and DTS-HD Master Audio support, which provides a cinematic surround sound experience that envelops listeners. The receiver comes with a built-in equalizer, giving users the ability to tailor sound output to their personal preferences and the acoustics of their viewing room.

Ease of use is a defining characteristic of the RX-772VBK. The intuitive on-screen setup guide simplifies installation, while the remote control provides straightforward access to settings and input selection. The receiver also features a sleep timer and customizable sound modes, enhancing user experience even further.

In addition to its performance, the RX-772VBK is designed with aesthetics in mind. Its sleek, black finish and modern design ensure that it complements any home decor, making it a welcome addition to your living space.

In summary, the JVC RX-772VBK is an impressive home theater receiver that brings together strong amplification, versatile connectivity, and advanced audio technologies. Whether you’re watching movies, listening to music, or gaming, this receiver promises to elevate your audio experience to new heights.
Top Page Image Contents