JVC RX-772VBK manual One-Touch Video Play, Automatic Selection of TV’s Input Mode

Page 40

FUNCTIONS:

This remote control system allows you to use four functions listed below.

Note:

Refer also to the manuals supplied with your video components.

7Remote Control of the TV through the Remote Sensor on the Receiver

You can control the TV through the remote sensor on the receiver using this remote control. For details, see page 39.

Note:

Aim the remote control directly at the remote sensor on the receiver when operating the TV. (However, to operate the VCR, always aim the remote control directly at the remote sensor on the VCR.)

7One-Touch Video Play

Simply by inserting a video cassette without its safety tab into the VCR, you can enjoy the video playback without setting other switches manually.

The receiver automatically turns on and changes the source to “VCR.”

The TV automatically turns on and changes the input mode to the position you can view the VCR playback. When you insert a video cassette with its safety tab, press the play (3) button on the VCR or on the remote control. So, you can get the same result.

Note:

When you connect an S-VHS VCR as described on page 36, you cannot see the on-screen displays (such as Visual Confirmation and Menus) since the AV COMPU LINK Remote Control System automatically changes the TV input mode to “Video input 1” when you operate the S-VHS VCR.

If you do not mind stopping watching the picture, you can then show the on-screen displays after changing the TV input mode to the position (Video input 2) the receiver is connected to.

7Automatic Selection of TV’s Input Mode

•When you select “TV SOUND” as the source to play on the receiver, the TV automatically changes the input mode to the TV tuner so that you can watch TV.

•When you select “VIDEO” as the source to play on the receiver, the TV automatically changes the input mode to the Video Input 2 so that you can watch the playback picture.

•When you select “VCR” as the source to play on the receiver, the TV automatically changes the input mode to the correct position (either Video Input 1 or 2) so that you can watch the playback picture.

Note:

When you select “TV SOUND” as the source on the receiver, you cannot see the on-screen displays (such as Visual Confirmation and the menu function) since the AV COMPU LINK remote control system automatically changes the TV’ input mode to the TV tuner.

If you do not mind stopping listening to the TV sounds, you can then show the on-screen displays after changing the TV input mode to the position (Video input 2) the receiver is connected to.

7Automatic Power On/Off

The TV and VCR turn on and off along with the receiver.

When you turn on the receiver;

•If the previously selected source is “VCR,” the TV and VCR will turn on automatically.

•If the previously selected source is “VIDEO” or “TV SOUND,” only the TV will turn on automatically. When you turn off the receiver, the TV and VCR will turn off.

Note:

If you turn off the receiver while recording on the VCR, the VCR will not turn off, but continue recording.

Page 37

Page 39 Page 41
Image 40
Page 39 Page 41
Contents RX-772VBK To Reduce the Risk of Electric Shock Wide Normal Phantom OFF Table of Contents Checking the Supplied Accessories Before InstallationGetting Started Switches, Buttons and Controls Front PanelRemote Control Remote Control UnitFM Antenna Connections Connecting the FM and AM AntennasAM Antenna Connections Connecting the Speakers Connecting the front speakersConnecting the rear and center speakers Connecting the subwoofer speakerOpen the terminal and then insert the speaker signal cable Close the terminalConnecting Audio/Video Components Audio component connectionsAudio Components Video Components If your audio components have a Compu LINK-3 terminalVideo component connections If your video components have an AV Compu Link terminalPutting Batteries in the Remote Control Connecting the Power CordR03 UM-4/AAA 24F Basic Operations Turning the Power On and OffSelecting the Source to Play Selecting the Front Speakers Adjusting the VolumeOn the front panel only Muting the Sound Listening with HeadphonesRecording a Source Adjusting the Front Speaker Output Balance Basic SettingsListening at Low Volume Loudness To cancel the Sleep Timer Using the Sleep TimerFrom the remote control Press Sleep repeatedly Selecting the Center Speaker Size Large Small noLarge SmallUsing Visual Confirmation ExamplesUsing the One Touch Operation To store the sound settings Press ONE Touch OperationTo cancel the One Touch Operation function One Touch OperationTuning in Stations Manually Using Preset TuningTo store the preset stations Receiving Radio BroadcastsSelecting the FM Reception Mode To tune in a preset stationAuto MonoAssigning Names to Preset Stations When a character you want appears, press Control #or @Press Control %/ Þto select a character Available charactersSelecting Your Favorite SEA Mode Using the SEA ModesRock Musical Movie Country SEA OFF Usermode Jazz Creating Your Own SEA Mode To recall your own SEA adjustmentTo erase a stored adjustment 100 1k 10kUsing the Surround Processor Using JVC’s Hall SurroundWhat is surround? Prologic 3CHLOGIC Hall Surr OFFDelay 1 Delay Delay 4 Delay DelayDelay Speaker arrangements for Dolby Surround Front Speaker Rear Speaker Center SpeakerThis case Front Speaker Rear SpeakerPreparing for Dolby Surround Wide Normal PhantomIf necessary, adjust the speaker output balance as follows SOFT2 SOFT1 Flat SHARP1 SHARP2Speakers Front speakersPress Test to start checking the speaker output balance Press Test again to stop the test toneUsing Dolby Surround Remote Control Surround OffUsing the On-Screen Display to Control the Receiver From the remote control Press MenuPress %/ Þto move To SETTING, then press @ / # Menu function buttonsListening at Low Volume Loudness Also see Press %/ Þto move To SEA Adjust then press @/ # Press %/ Þ/ @ / # to adjust the SEA mode as you wantPress %/ Þto move to TUNER, then press @/ # Press %/ Þto move to SEA, then press @/ #Press %/ Þto move to Surround ADJUST, then press @ / # Press %/ Þto move To SURROUND, then press @/ #Press %/ Þ to move to one of the surround modes For Dolby Pro LogicCompu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverCD player Cassette deck Automatic Source SelectionAV Compu Link Remote Control System To video input 1 S-video jack using S-video cableTo video input 2 jack using video cable When using a VHS VCR, connect it as follows See alsoAutomatic Power On/Off Automatic Selection of TV’s Input ModeOne-Touch Video Play Tuner Sound control section AmplifierCD player CD player-changerTurntable Cassette deckTV/CATV/SAT Power TV Volume +Channel + 10, 0, +10VCR Power Try to operate your VCR by pressing VCR PowerManufacturers’ codes for TV Yamaha 019 Zenith 016 056, 177Manufacturers’ codes for Catv converters Manufacturers’ codes for satellite tuner Manufacturers’ codes for VCR149, 212 XR-1000 000, 035 Yamaha 038 Zenith 033, 034Troubleshooting Problem Possible CauseAmplifier SpecificationsVideo AM tuner FM tuner IHFGeneral Factory Service Center Locations QualityserviceIf you ship the product Limited Warranty AUDIO-2 0497OFYOTKJEM

RX-772VBK specifications

The JVC RX-772VBK is a versatile home theater receiver designed to deliver an immersive audio experience for music and movie enthusiasts alike. With a user-friendly interface and an array of cutting-edge features, the RX-772VBK stands out as a robust choice for those looking to enhance their home entertainment system.

One of the most notable features of the RX-772VBK is its powerful amplification. With a robust output of 100 watts per channel, this receiver can drive a wide range of speakers and produce clear, dynamic sound at any volume level. Whether it’s blasting your favorite music or creating a rich soundscape for movies, the RX-772VBK handles it with ease.

Connectivity is another key area where the RX-772VBK shines. It includes multiple HDMI inputs, allowing you to connect various devices such as Blu-ray players, gaming consoles, and streaming devices seamlessly. The receiver supports 4K video pass-through, ensuring that your high-definition content looks its best. Additionally, it features built-in Bluetooth technology, enabling users to wirelessly stream music from smartphones, tablets, or laptops.

The RX-772VBK also incorporates advanced audio processing technologies. It includes Dolby TrueHD and DTS-HD Master Audio support, which provides a cinematic surround sound experience that envelops listeners. The receiver comes with a built-in equalizer, giving users the ability to tailor sound output to their personal preferences and the acoustics of their viewing room.

Ease of use is a defining characteristic of the RX-772VBK. The intuitive on-screen setup guide simplifies installation, while the remote control provides straightforward access to settings and input selection. The receiver also features a sleep timer and customizable sound modes, enhancing user experience even further.

In addition to its performance, the RX-772VBK is designed with aesthetics in mind. Its sleek, black finish and modern design ensure that it complements any home decor, making it a welcome addition to your living space.

In summary, the JVC RX-772VBK is an impressive home theater receiver that brings together strong amplification, versatile connectivity, and advanced audio technologies. Whether you’re watching movies, listening to music, or gaming, this receiver promises to elevate your audio experience to new heights.
Top Page Image Contents