Front Fender Install (various models) - continued
Assembly
3.Place the Fender (3) in the fork with the longer fork mounting tab (A) on the rear side of the fork (fig 02).
4.Insert the Bolt (8) through the Washer
(9)and Fender tabs and fork mounting hole.
5.Install Washer (9) and Nut (10) onto Bolt
(8)and tighten securely.
9
8
10 9
A 3
figfig 0102
6. Line up the lower Fender Braces (B) with the Fork Mounting Tabs (C) (fig 03).
7. Insert each lower mounting Bolt (7) and Washer (6) into the Fork Mounting Tabs
(C) and tighten securely.
7
C
B
6
fig 03
10