Huffy M0073 Maintenance Repair, Service and Adjustment, Luggage Rack Adjustment various models

Page 22

Maintenance

Repair, Service and Adjustment

WARNING:

•Inspect the bicycle frequently. Failure to inspect the bicycle and to make repairs or adjustments, as necessary, can result in injury to the rider or to others. Make sure all parts are correctly assembled and adjusted as written in this manual and any “Special Instructions”.

•Immediately replace any damaged, missing, or badly worn parts.

•Make sure all fasteners are correctly tightened as written in this manual and any “Special Instructions”. Parts that are not tight enough can be lost or oper- ate poorly. Over tightened parts can be damaged. Make sure any replacement fasteners are the correct size and type.

NOTE: Have a bicycle service shop make any repairs or adjustments for which you do not have the correct tools or if the instructions in this manual or any “Special In- structions” are not sufﬁcient for you.

Luggage Rack Adjustment (various models)

1.Loosen Adjustment Knob (B) by turning counter clockwise.

2.Slide Adjustable Rack (A) into position

3.Tighten with Adjustment Knob by turning clockwise.

NOTE: Do not over-tighten. This will damage the Knob.

A B

22

Image 22

Contents For Multi-Speed Comfort Bicycles Components Fitting the Rider to the Bicycle Introduction Owner’s Bicycle Identiﬁcation RecordModel / Serial Number Purchase Date Model Name Meanings of Warnings Reﬂectors Rules of the RoadIf you must ride at night or at time of poor visibility Make yourself more visible to motorists Owner’s ResponsibilityUse extra caution in wet weather Components List DescriptionFlat-blade Screwdriver Assembly IntroductionTools Needed Slip-Joint PliersLoosen the Front Brakes Front Fender Install various modelsAssembly Use Screw Driver and WrenchFront Fender Install various models Assembly Assemble the Front Wheel to the Fork Re-attach Front Brake Cable Rear Fender Install various models Tighten Top Fender MountHandlebar and Stem Instal One Bolt Stem various modelsTwo Bolt Stem various models Handlebar and Stem Install08a To test the tightness of the stem Assembly Testing Stem and Handlebar TightnessTo test the tightness of the handlebar clamp Seat Installation Attach Seat to Seat Post ﬁgAssembly Tightening Seat Quick Release Lever Tighten the quick release leverIf the Seat 14 moves in the Seat Clamp ﬁg 10a Testing Seat Clamp and Post Clamp TightnessTo test the tightness of the seat clamp and the post clamp If the Seat Post 33 moves in the Seat Tube BRear Reﬂector Install various mod- els Assembly Front / Rear Reﬂectors Installation various modelsFront Reﬂector Install Dual Rear Reﬂectors various modelsPedal Installation Tighten the pedals ﬁgMaintenance Repair, Service and Adjustment Luggage Rack Adjustment various modelsTires MaintenanceMaintenance Inﬂating the TiresPut the brake shoes B in the correct position ﬁg Maintenance Brake SystemTest the tightness of each Brake Shoe Stretching the Cable Final Brake Adjustment Before RidingTightening the cable ﬁg Center brake shoes on rimPut the brake shoes the correct distance from the rim ﬁg Test the tightness of the cable clamp ﬁg Test the travel of each brake leverParts of the Shift System Maintenance Shift SystemOperation Operate the shift system as follows Shift System Maintenance Rear Derailleur Adjustments Adjust the Index Shift System Crank Bearings Maintenance Inspection of the BearingsHead Tube Bearings Wheel BearingsWhat When How Maintenance Lubrication TableLubrication What must you do to keep the Limited Warranty in effect? Warranty Huffy Corporation Limited WarrantyWhat does this Limited Warranty cover? What is not covered by this Limited Warranty?How do you get service? WarrantyFor how long does this Limited Warranty last? What rights do you have?Always Wear Your Helmet When Riding this Product