Huffy M0073 manual Seat Installation, Attach Seat to Seat Post fig

Seat Installation

Attach Seat to Seat Post (fig 09):
(pre-assembled on some models)
• Loosen nuts on Seat Clamp (A) and
	rotate Seat (14) into riding position.
•	Put the Seat Post (33) fully through
	the Seat Clamp.
•	Tighten the Seat Clamp so the Seat
	stays on the seat post.	14
• If the Seat Clamp has a nut on each			A
	side, tighten both nuts equally.

33

Assembly

fig 09

CAUTION: If you accidentally drop the seat post into the seat tube, it may be difficult to remove it.

•Point the Seat forward and put the Seat Post into the Seat Tube (B) (figs 10, 11).

WARNING: To prevent the seat coming loose and possible loss of control, the “MIN-IN” (minimum inser- tion) mark (C) on the seat post must be below the top of the Seat Tube.

33

C

14 C B

B

fig 10

continued >>

17