Huffy M0073 manual Adjust the Index Shift System

Page 31

Rear Derailleur Adjustments - continued

Put the “low” adjusting Screw in the correct position as follows (fig 22):

•Shift the chain onto the largest rear Sprocket (F).

•Loosen Nut of the cable clamp.

•Turn the “low” adjusting Screw (H) so the Jockey Roller is exactly below the larg- est rear sprocket.

•Tighten the Nut of the cable clamp.

Adjust the Index Shift System:

•Shift the chain onto the smallest rear sprocket.

•Without turning the crank, turn the Right Shift Control (A) one “click” rearward.

•Slowly turn the crank forward.

•The chain should move from the smallest rear sprocket to the next larger rear sprocket.

•Turn the Adjusting Barrel (B) OUT as needed so the chain moves exactly on to the second rear sprocket and does not rub, jump, or delay.

Maintenance

B

A

fig 23

When adjusted properly, the shift system will operate smoothly with no chain rubbing.

Note: If you have trouble, take the bike to a bike shop.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents For Multi-Speed Comfort Bicycles Components Fitting the Rider to the Bicycle Introduction Owner’s Bicycle Identification RecordModel / Serial Number Purchase Date Model Name Meanings of Warnings Reflectors Rules of the RoadIf you must ride at night or at time of poor visibility Make yourself more visible to motorists Owner’s ResponsibilityUse extra caution in wet weather Components Description ListSlip-Joint Pliers Assembly IntroductionTools Needed Flat-blade ScrewdriverUse Screw Driver and Wrench Front Fender Install various modelsAssembly Loosen the Front BrakesFront Fender Install various models Assembly Assemble the Front Wheel to the Fork Re-attach Front Brake Cable Tighten Top Fender Mount Rear Fender Install various modelsOne Bolt Stem various models Handlebar and Stem InstalTwo Bolt Stem various models Handlebar and Stem Install08a To test the tightness of the stem Assembly Testing Stem and Handlebar TightnessTo test the tightness of the handlebar clamp Attach Seat to Seat Post fig Seat InstallationTighten the quick release lever Assembly Tightening Seat Quick Release LeverIf the Seat Post 33 moves in the Seat Tube B Testing Seat Clamp and Post Clamp TightnessTo test the tightness of the seat clamp and the post clamp If the Seat 14 moves in the Seat Clamp fig 10aDual Rear Reflectors various models Assembly Front / Rear Reflectors Installation various modelsFront Reflector Install Rear Reflector Install various mod- elsTighten the pedals fig Pedal InstallationLuggage Rack Adjustment various models Maintenance Repair, Service and AdjustmentInflating the Tires MaintenanceMaintenance TiresPut the brake shoes B in the correct position fig Maintenance Brake SystemTest the tightness of each Brake Shoe Center brake shoes on rim Final Brake Adjustment Before RidingTightening the cable fig Stretching the CablePut the brake shoes the correct distance from the rim fig Test the travel of each brake lever Test the tightness of the cable clamp figParts of the Shift System Maintenance Shift SystemOperation Operate the shift system as follows Shift System Maintenance Rear Derailleur Adjustments Adjust the Index Shift System Wheel Bearings Maintenance Inspection of the BearingsHead Tube Bearings Crank BearingsWhat When How Maintenance Lubrication TableLubrication What is not covered by this Limited Warranty? Warranty Huffy Corporation Limited WarrantyWhat does this Limited Warranty cover? What must you do to keep the Limited Warranty in effect?What rights do you have? WarrantyFor how long does this Limited Warranty last? How do you get service?Always Wear Your Helmet When Riding this Product
Top Page Image Contents