Huffy M0073 Assembly Front / Rear Reflectors Installation various models, Front Reflector Install

Assembly

Front / Rear Reflectors Installation (various models)

Front Reflector Install:

1. Position Reflector (17) so it is near the Stem (A) and points straight forward (fig 12).

2. Tighten Clamp Screw.

NOTE: Do not over-tighten. This will

damage the Clamp.17 Make sure Reflector view is not ob-

structed.

A

fig 12

Rear Reflector Install (various mod- els):

1.Position Reflector (18) so it points straight backwards and is not above the seat post limit (A) (fig 13).

2.Tighten Clamp Screw.

NOTE: Do not over-tighten. This will damage the Clamp.

Make sure Reflector view is not ob- structed.

A

18

fig 13

Dual Rear Reflectors (various models):

The Rear Reflectors (40) are pre-installed on the bike. Make sure they are secure, not bent and are pointing straight back- wards.

40

20