F
Assembly
Do not omit any steps. Please set aside at least 30 minutes for assembly.
1 | Handgrip |
| |
| Handgrip |
| Streamer |
•Using the tip of a slotted screwdriver, press the metal retainer on a handgrip streamer into the hole in a handgrip, as shown.
•Repeat this procedure to attach the other handgrip streamer to the other handgrip.
2
Handlebar
Plug
Hand
Grip
•Position the ribbed end of a handlebar plug against the top end of a handlebar.
•Push firmly to insert the handlebar plug into the end of the handlebar.
•Moisten a handgrip with warm water.
•Slide the handgrip onto the end of the handlebar.
•Repeat this procedure to attach the other handlebar plug and handgrip to the other handlebar.
3 |
| |
Swivel | Left Handlebar | |
Bracket | ||
| ||
| Vehicle Body |
•Stand the vehicle body on its rear wheels.
•Slide the left handlebar through the holes in the left side of the swivel bracket.
Note: The left handlebar is marked “L”; the right handlebar is marked “R”.
4 | Swivel Bracket |
#8 x 3/4" Screw – 2 | |
| Shown Actual Size |
| Left Handlebar |
•Align the screw holes in the left side of the swivel brack- et with the screw holes in the left handlebar.
•Insert two #8 x 3/4" screws into the left handlebar.
•Tighten each screw with a Phillips screwdriver. Do not
•Repeat steps 3 and 4 to assemble the right handlebar to the vehicle body.
9