Precor S3.15 manual Assemble Weight Stack

S3.15 Assembly and Maintenance Guide

4. Assemble Weight Stack

Important: Obtain adult assistance before installing the Guide Rods and Weights.

A.Place the Guide Rods into the two outside holes in the Main Base.

CAUTION: The lubricant on the Guide Rods can stain clothes. Wear proper attire when working with or lubricating the Guide Rods.

B.Place one Guide Rod Spacer and one Weight Cushion on each Guide Rod and allow it to slide down and rest on the Main Base.

Note: Guide Rod Spacers do not need to be installed if the Heavy Stack Option is purchased through your dealer.

C.Add the 10-lb weights. For ease of weight pin placement and use, orient the curve on the weight plate to the desired side of the unit. Position the weight plate so the plastic bushing is on top and hold your finger over the plastic bushing to prevent it from popping out.

CAUTION: The weights are heavy! Handle the weights carefully so as not to drop them or injure yourself. Pick up and place one weight at a time on the Guide Rods. Do not angle the Guide Rods to such a degree that they dislodge the Guide Rod Spacers or Weight Cushions. Have someone hold the Guide Rods in place while you slide the weights on the stack.

	C
A
Guide Rod
Weight	Weight
Cushions
B
Guide Rod Spacers
(Do not install spacers if you
purchased the Heavy Stack Option.)

1

2

3

4

5

6

Step 4. Assemble Weight Stack

page 13