Precor S3.15 manual Assemble Main Structure

S3.15 Assembly and Maintenance Guide

1. Assemble Main Structure

A.Attach the Main Base to the Rear Crossbar using two 4³⁄₄-inch hex head bolts

four flat washers two locknuts

B.Install the Rear Upright to the Main Base using two 4³⁄₄-inch hex head bolts

four flat washers two locknuts

Note: Position the uprights so the Shroud mounts face the center of the unit.

C.Attach the Main Upright to the Main Base using

two 2¹⁄₄-inch hex head bolts four flat washers

two locknuts

Rear Crossbar
	Main Base
2 - 4³⁄₄" bolts
A 4 - washers
2 - locknuts
			Shroud	Main Upright
	Rear Upright		Mounts
					2 - 2¹⁄₄" bolts
					C 4 - washers
					2 - locknuts
2 - 4³⁄₄" bolts		B
4 - washers
2	- locknuts
			Main Base
1	2	3	4	5	6

Step 1. Assemble Main Structure

page 8