Precor S3.15 manual Seat Stem Frame

S3.15 Assembly and Maintenance Guide

G.Continue to feed the cable through the Seat Frame.

H.Disassemble the 3½-inch pulley located beneath the seat. Feed the cable over the pulley and reattach the pulley to the Seat Frame using one 3-inch hex head bolt

two ³⁄₄-inch shoulder spacers one locknut

J.Feed the cable under the lower 3½-inch pulley located on the Seat Stem.

K.Feed the cable through the opening and under the 3½-inch pulley located in the Leg Extension Arm.

L.Replace the rubber washer and cable stop ball onto the end of the cable and insert the end of the cable into the U-bracket. Complete the U-bracket assembly using

one 1¼-inch shoulder bolt one locknut

M.Wrench tighten all pulley fasteners.

		1 - 3" bolt	H
		2 - ³⁄₄" shoulder spacers
		1 - locknut
Leg Extension Arm
Seat Stem
	K		G	Seat
				Frame
			J
L	1	- rubber washer
	1 - cable stop ball
	1	- U-bracket
	1	- 1¼" bolt
	1	- locknut
1		2	3	4	5	6

Step 8. Install Leg Extension Cable, continued

page 21