S3.15 Assembly and Maintenance Guide
4 Cableand MaintenanceAdjustments
When the S3.15 is completely assembled, you need to check the cables for proper tension. Obvious signs that cable problems exist include:
✔Top Cap Weight does not rest squarely on the top weight of the Weight Stack.
✔Cable rubs the inside edges of the pulleys.
✔Excess slack exists in the cable.
✔Weight Pin cannot be easily inserted in or removed from each hole in the Weight Stack.
CAUTION: Take the time to perform the following steps. If the cables do not have the proper tension you could void the Precor Limited Warranty.
1 | 2 | 3 | 4 | 5 | 6 |
Cable Adjustments and Maintenance
page 26