![](/images/new-backgrounds/1183374/18337413x1.webp)
Before Your Run
Downloading and Installing
the Nike+ Utility
Before you start, you must download and install the Nike+ Utility in your computer.
Important: Do not connect the Nike+ SportBand Link to the USB port of your computer until you download and install the Nike+ Utility. (fig.10)
1.Go to www.nikeplus.com/downloads
2.Download the Nike+ Utility Installer.
3.Launch the Nike+ Utility Installer, then follow the instructions.
Connecting and Charging the Link
After the Nike+ Utility is installed, take the Link out of the SportBand and connect it to a USB port on your computer. The Nike+ Utility will launch automatically. (fig.11)
When you connect the SportBand Link to your computer, the battery will begin to charge. For best results, charge it for about 2 hours or until the battery icon shows that the battery is fully charged.
Note: Only one SportBand Link can be managed at a time.
fig.10
nikeplus.com/downloads
fig.11
The Nike+ SportBand User’s Guide | 7 |