After Your Run
Reviewing Your Runs
The Review loop that happens after a run ends on the TIME screen, showing you the current time of day. Press the Toggle button (on the side) to see again a review of your LAST run (the loop will play twice then stop at your distance). Press Toggle again to see your weekly miles or kilometers (Sunday at 12:00am to Saturday at 11:59pm). Push the Toggle button one more time to see the total miles recorded on your SportBand. One more push of the Toggle button will take you back to the time of day. (fig.31)
1.From the current time display, press the Toggle button (on the side) once to review your last run. The word LAST will appear, followed by your most recent run info: distance, pace, time, then calories burned.
It cycles through these run metrics twice, then stops at distance. (fig.32)
2.To review the distance you’ve run in the past week (Sunday at 12:01am to Sunday at 12:00am), press the Toggle button (on the side) again. The word WEEK appears, followed by your distance. (in miles or kilometers, fig. 33)
3.To review the total number of miles recorded, press the Toggle button one more time. The letters TOTL, short for total, appears, followed by your total miles or kilometers recorded with the SportBand so far. (fig.34)
Viewing the Current Time
The SportBand also functions as watch.
Press the Toggle button (on the side) to cycle through the three review screens of your workouts until you get to the current time.
Note: To make adjustments to the time, refer to the User tab settings in the Nike+ Utility.
fig.31
toggle
fig.32
x2, loops twice 
fig.33
weekly distance
fig.34
total distance
The Nike+ SportBand User’s Guide | 19 |