Nike + SPORTBAND manual About the Memory

About the Memory

The sportband stores up to 28 hours of run info. ( Approximately 1 month of running 1 hour a day.)

If you aren’t recording a run, the MEM LOW message will appear on the display when there is approximately 1 hour of recording time left. You can still go for a run, but the memory will only record approximately 1 hour’s worth of run info.

If you press and hold the Record button (on top) to start a run, and the memory has reached its full capacity, the MEM FULL message will blink twice before exiting to the time of day. You cannot record a run when the memory is full.

If the memory reaches its full capacity while you’re recording a run, the SportBand will continue recording but will only save the last measurement taken when you end your run. In the nikeplus.com site you will see a flat line for this period but you will be able to record the total distance of your run.

To free-up the memory, connect your SportBand Link to the USB port of a computer installed with the Nike+ Utility. All of your recorded runs will be uploaded to nikeplus. com, and the memory will be freed to record more runs.