Nike + SPORTBAND manual About Specifications

Page 29

About Specifications

Nike+ SportBand Specifications

The Nike+ SportBand has a custom rechargeable battery made of lithium polymer. It’s an internal, non-user-replaceable battery. If the product hasn’t been used for a while, the battery may need to be charged. The battery is 80% charged in about 1.5 hours and fully charged in 2 hours.

Water resistance: IPX-7 can be immersed in one meter of water for 30 minutes. You can wear it to run in the rain, but don’t swim in it.

ATTENTION: Water damage may occur if the buttons are pressed underwater.

ATTENTION: Hot steam may cause damage to the product. Do not wear in steaming shower, spa or hot tub.

ATTENTION: Product should be rinsed thoroughly in fresh water after being exposed to salt water.

The operating temperature is 0 to 50° Celsius.

The buckle is made of stainless steel. The case is polycarbonate, and the strap is poly- urethane.

WARNING: NOT A MEDICAL DEVICE.

Should not be used to diagnose, treat or prevent any disease or medical condition.

Before starting any exercise program, you should have a complete physical examination by your physician. Do a warm-up or stretching exercise before beginning any workout. Be careful and attentive while exercising. Stop exercising immediately if you feel pain, or feel faint, dizzy, exhausted or short of breath. By exercising, you assume the risks inher- ent in physical exercise, including any injury that may result from such activity.

Warning: the sensor is a potential choking hazards. Keep it away from children under three years of age.

Important: Do not attempt to open the sensor, disassemble it, or remove the battery. No user-serviceable parts are inside.

The Nike+ SportBand User’s Guide

29

Image 29
Contents Nike+ SportBand User’s Guide Table of Contents Welcome to Nike+ SportBand To use your Nike+ SportBand, you must have What You Need to Get StartedQuick Start Download and install the Nike+ UtilityConnect the Link and customize the settings Upload your runs to nikeplus.com Go for a runBefore Your Run Downloading and Installing Nike+ UtilityConnecting and Charging the Link Nike+ Utility Main Window Nike+ UtilityEntering Your Weight To Track Calories Burned Settings WindowUser Tab Logging-in or Joining Nike+Resetting the SportBand Link to Factory Settings Setting the Units of DistanceTime Tab Setting the TimeCalibrating Your Nike+ SportBand Calibration TabCalibration Nike+ Utility Menu contains the following items Nike+ Utility MenuRecord and Toggle Buttons Using Your Nike+ SportBandRecording a Run During Your RunChecking Your Metrics Pausing and Resuming a RunEnding a Run Viewing the Current Time After Your RunReviewing Your Runs Linking to More Than One Sensor Losing Connection to a Sensor About the Memory Charging the Battery About a Critical Battery Understanding Battery StatesAbout a Low Battery Resetting the Nike+ SportBand Uploading Your Runs to nikeplus.com Updating the Nike+ SportBand Link Making UpdatesUpdating the Nike+ Utility Putting the Sensor to Sleep Using the SensorAbout the Sensor’s Battery Life About Specifications Learning More, Service and Support One-Year Limited Warranty Nike+ SportBand WarrantySoftware Requirements About Compliance