Precor S3.25 manual Assemble the Frame

S3.25 Leg Press Option Assembly Instructions

D.Assemble the Footrest by resting the Pivot Arm on the Rubber Bumper. Make sure that the red arrow on the back of the Footrest points toward the ceiling.

E.Attach the Footrest to the Pivot Arm and Pivot Tube using

two large ½-inch by 3-¼-inch bolts four ½-inch-diameter washers two large ½-inch locknuts

Wrench tighten enough to allow free movement of the Pivot Arm.

F.Attach the Handle to the Seat Frame using two 3-inch bolts

four washers two locknuts Wrench tighten.

	2 - large ½" x 3¼" bolts
	E 4 - ½" diameter washers
	2 - large ½" lock nuts
		2	- 3" bolts
		F 4	- washers
		2	- locknuts
			Pop Pin
Footrest	Pivot Arm
	Handle
	Footrest		Seat Frame

Red Arrow Label

Pivot Arm

Pivot Tube Rubber Bumper

D Rest the Pivot Arm on the

Rubber Bumper

1

2

3

4

5

6

Step 3. Assemble the Frame, Continued

page 10