Precor S3.25 manual Replace the Shroud

Page 15

S3.25 Leg Press Option Assembly Instructions

7. Replace the Shroud

A.Pick up the Shroud and fasteners from the location where you left them in Step 4B.

B.Replace the Shroud by realigning the mounting holes and inserting

six 2¾-inch bolts six washers six locknuts Wrench tighten.

Top Beam

Notch in Shroud fits around Top Beam fastener

A Replace Shroud

1

2

3

4

5

6 - 2¾" bolts B 6 - washers 6 - locknuts

6

Step 7. Replace the Shroud

page 15

Image 15

Contents S3.25 Important Safety Instructions Safety InstructionsTable of Contents Before You Begin 1Before You BeginPreparations Assembly Instructions AssemblyInstructionsRemove the Shroud Attach the Cross Brace to the S3.25 Locking it in place with the Pop Pin Assemble the FrameAssemble the Frame Assemble the Seat Pads Route the Cable Assemble the Cable and Pulleys Assemble the Cable and Pulleys Replace the Shroud Stretch the Cable AdjustmentsRotate the Cam Washer Adjust the Rubber Bumper on the Leg Press Option Conditions Residential Equipment Limited WarrantyWarranty Registration Card

Related manuals

Manual 22 pages 36.11 Kb

Manual 22 pages 61.67 Kb