Precor S3.25 manual Assemble the Cable and Pulleys

S3.25 Leg Press Option Assembly Instructions

C.Reattach the end of the original Surgical Tube from the Cable Tree to its prior location and place the new Surgical Tube that came with the Leg Press Option to the outside of the Top Beam using

one 4-inch bolt two washers

two ½-inch barrel spacers one locknut

Wrench tighten.

D.Place the ball-end of Leg Press Option Cable 40538- 101 up through the Cable Tree and place

it securely in the U-clip.

E.Remove the buttonhead bolt and nylock nut from the U-clip.

F.Attach the end of the original surgical tube to the Cable Tree using the 1¼-inch buttonhead bolt and thin nylock nut removed in Step 6E. Wrench tighten.

Note: If you are assembling the Leg Press Option and the S3.25 simultaneously, go to Step 21 in the S3.25 Assembly and Maintenance Guide now.

					1 - 4" bolt
					C 2 - washers
					2 - ½" barrel spacers
					1 - locknut
				New Surgical
				Tube
					1 - 1¼" button head bolt		E
					1 - thin nylock nut
				New Surgical
Original				Tube
Surgical Tube
		Cable Tree
						U-clip
						Attach ball-
					D end of Cable
						to U-clip
				Cable Tree	Cable 40538-101
					(from Leg Press)
1	2	3	4		5	6

Step 6. Assemble the Cable and Pulleys, Continued

page 14