S3.25 Leg Press Option Assembly Instructions
Weight then further adjustments are needed. Continue with steps 2 and 3.
2. Rotate the Cam Washer
If the Top Cap Weight does not rest on the Top Weight, you must make further adjustments.
A.Remove excess tension from the Cable by placing the Weight Pin into the Selector Stem just under the Top Cap Weight.
B.To tighten or loosen the Cable tension, rotate the Cam Washer.
C.Look to see that Top Cap Weight rests squarely on the Weight Stack. If it does, no more adjustments are needed and the Leg Press Option is ready to use. If the Top Cap Weight does not rest on the Top Weight, then further adjustments are needed. Continue with step 3.
|
| A |
|
|
|
|
| Top Cap |
|
|
|
|
| Weight |
|
|
|
|
| Top Weight |
|
|
|
|
| Weight Pin |
|
| Rotate the |
|
|
|
|
| B Cam Washer |
|
|
|
| C |
|
|
| Top Cap |
|
|
|
|
| Weight |
|
|
|
1 | 2 | 3 | 4 | 5 | 6 |
Step 2. Rotate the Cam Washer
page 17